P314 Broadband Sharing Gateway with
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes |
|
|
|
IP Protocol= | 6 | IP Source | Route= No |
Destination: | IP Addr= 0.0.0.0 |
| |
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
| IP Mask= 0.0.0.0 | |
| Port | #= |
| Port | # Comp= None |
TCP Estab= No |
|
|
More= No |
| Log= None |
Action Matched= Drop
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
| Figure | Menu 21.1.1.1 – TCP/IP Filter Rule |
|
The following table describes how to configure your TCP/IP filter rule. |
| ||
| Table | TCP/IP Filter Rule Menu Fields |
|
|
|
|
|
Field |
| Description | Option |
|
|
| |
Active | This field activates/deactivates the filter rule. | Yes/No | |
|
|
| |
IP Protocol | Protocol refers to the upper layer protocol, e.g., TCP is 6, | ||
| UDP is 17 and ICMP is 1. This value must be between 0 |
| |
| and 255 |
|
|
|
|
| |
IP Source Route | If Yes, the rule applies to packet with IP source route | Yes/No | |
| option; else the packet must not have source route option. |
| |
| The majority of IP packets do not have source route. |
| |
|
|
| |
Destination: IP | Enter the destination IP Address of the packet you wish to | IP address | |
Addr | filter. This field is disregarded if it is 0.0.0.0. |
| |
|
|
| |
Destination: IP | Enter the IP mask to apply to the Destination: IP Addr. | IP mask | |
Mask |
|
|
|
|
|
| |
Destination: Port # | Enter the destination port of the packets that you wish to | ||
| filter. The range of this field is 0 to 65535. This field is |
| |
| disregarded if it is 0. |
| |
|
|
| |
Destination: Port # | Select the comparison to apply to the destination port in | None/Less/Greater/ | |
Comp | the packet against the value given in Destination: Port #. | Equal/Not Equal] | |
|
|
|
|
|
|
|
|
|
| Filter Configuration | |