P314 Broadband Sharing Gateway with
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version=
Multicast=
Press ENTER to Confirm or ESC to CANCEL:
Press Space Bar to Toggle.
Figure | Menu 3.2 – TCP/IP and DHCP Ethernet Setup |
| ||
Follow the instructions in the following table on how to configure the DHCP fields. |
| |||
| Table | LAN DHCP Setup Menu Fields |
| |
|
|
|
|
|
Field |
|
| Description | Example |
|
|
| ||
DHCP= | This field enables/disables the DHCP server. If it is set to Server, | None | ||
| your Prestige will act as a DHCP server. If set to None, DHCP | Server (default) | ||
| service will be disabled and you must have another DHCP sever |
| ||
| on your LAN, or else the workstation must be manually |
| ||
| configured. When DHCP is set to Server, the following four items |
| ||
| need to be set. |
|
| |
|
|
| ||
Client IP Pool | This field specifies the first of the contiguous addresses in the IP | 192.168.1.33 | ||
Starting Address | address pool. |
|
| |
|
|
| ||
Size of Client IP Pool | This field specifies the size, or count, of the IP address pool. | 32 | ||
|
|
| ||
Primary DNS | Enter the IP addresses of the DNS servers. The DNS servers are |
| ||
Server | passed to the DHCP clients along with the IP address and the |
| ||
Secondary DNS | subnet mask. Leave these entries at 0.0.0.0 if they are provided |
| ||
Server | by a WAN DHCP server. |
| ||
|
|
|
|
|
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
Internet Access |