P314 Broadband Sharing Gateway with 4-Port Switch

Chapter 10

System Maintenance & Information

This chapter leads you through SMT menus 24.8 to 24.9 and also discusses bootbase commands.

10.1 Command Interpreter Mode

This option allows you to enter command interpreter mode, a “DOS prompt” type command interface, which allows more advanced system diagnosis and troubleshooting (beyond the scope of this guide). See our PNC supporting disk or the ZyXEL web site at www.zyxel.com for more detailed information on CI commands. Enter 8 from Menu 24 – System Maintenance. A list of valid commands can be found by typing [help] or [?] at the command prompt. Type “exit” to return to the SMT main menu when finished.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Firmware Upload

8.Command Interpreter Mode

9.Call Control

Enter Menu Selection Number:

Figure 10-1 Command Mode in Menu 24

Copyright (c) 1994 - 2000 ZyXEL Communications Corp.

ras> ?

 

 

 

Valid commands are:

 

 

sys

exit

device

ether

poe

ip

ppp

hdap

ras>

 

 

 

Figure 10-2 Valid Commands

System Maintenance and Information

10-1