P314 Broadband Sharing Gateway with
Password | Enter the password assigned to you. |
|
|
|
|
Enable | Your Prestige supports DYNDNS Wildcard. Press [SPACE | Yes |
Wildcard | BAR] to toggle between Yes or No This field is N/A when you |
|
| choose DDNS client as your service provider. |
|
|
|
|
The IP address will be updated when you reconfigure Menu 1 or perform DHCP client renewal.
Please note that:
♦The Prestige supports basic DDNS, i.e., insecure login and password.
♦If you have a private WAN IP address, then you can not use this service.
2.8WAN Setup
This section describes how to configure the WAN using Menu 2 – WAN (10 Mbps Ethernet) Setup. From the Main Menu, enter 2 to open Menu 2.
You only need to configure this menu if your ISP requires MAC address authentication.
Menu 2 - WAN Setup
MAC Address:
Assigned By=IP address attached on LAN
IP Address= 192.168.1.42
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle
FigureThis menu allows you to configure the WAN port's MAC Address by using either the factory default or cloning the MAC address from a workstation on your LAN. Once it is successfully configured, the address will be copied to the rom file (ZyNOS configuration file). It will not change unless you change the setting in Menu 2 or upload a different rom file.
The following table contains instructions on how to configure your WAN setup.
|
| Table | WAN Setup Menu Fields |
|
|
| Field |
| Description | Examples |
|
|
|
|
|
|
|
| MAC Address |
|
|
|
|
|
|
|
|
| |
| Assigned By | Press the [SPACEBAR] to choose either of the two methods of | Factory |
| |
|
| assigning a MAC Address. Choose Factory Default to select the | Default |
| |
|
| factory assigned default MAC Address. Choose IP Address attached |
|
| |
|
|
|
|
|
|
|
| Hardware Installation and Setup |