ZyXEL Communications P314 Table, Generic Filter Rule Menu Fields

P314 Broadband Sharing Gateway with 4-Port Switch

The following table describes the fields in the Generic Filter Rule Menu.
	Table 7-5	Generic Filter Rule Menu Fields
Field		Description	Option
Filter #	This is the filter set, filter rule coordinates, i.e., 2,3 refers to the second filter
	set and the third rule of that set.
Filter Type	Use the [SPACE BAR] to toggle between both types of rules. Parameters		Generic Filter
	displayed below each type will be different.		Rule/ TCP/IP
			Filter Rule
Active	Select Yes to turn on the filter rule.		Yes/No
Offset	Enter the starting byte of the data portion in the packet that you wish to		Default = 0
	compare. The range for this field is from 0 to 255.
Length	Enter the byte count of the data portion in the packet that you wish to		Default = 0
	compare. The range for this field is 0 to 8.
Mask	Enter the mask (in Hexadecimal) to apply to the data portion before
	comparison.
Value	Enter the value (in Hexadecimal) to compare with the data portion.
More	If Yes, a matching packet is passed to the next filter rule before an action is		Yes/No
	taken; else the packet is disposed of according to the action fields.
	If More is Yes, then Action Matched and Action Not Matched will be No.
Log	Select the logging option from the following:		None
	z None – No packets will be logged.		Action
	z Action Matched – Only packets that match the rule parameters will		Matched
			Action Not
	be logged.
	z Action Not Matched – Only packets that do not match the rule		Matched
			Both
	parameters will be logged.
	z Both – All packets will be logged.
Action	Select the action for a matching packet.		Check Next
Matched			Rule
			Forward
			Drop
Action Not	Select the action for a packet not matching the rule.		Check Next
Matched			Rule
			Forward
			Drop
7-12		Filter Configuration