P314 Broadband Sharing Gateway with 4-Port Switch

Once you have completed filling in Menu 21.4.1.1 – Generic Filter Rule, press [ENTER] at the message [Press ENTER to Confirm] to save your configuration, or press [ESC] to cancel. This data will now be displayed on Menu 21.1.1 – Filter Rules Summary.

7.3Example Filter

Let’s look at the first rule in the third default ZyXEL filter set, TELNET_FTP_Web_WAN (see Figure 7-6) as an example. Please see our PNC Disk for more example filters. This filter is designed to block outside users telnetting into the Prestige.

Figure 7-10 Telnet Filter ExampleStep 1. Enter 21 from the Main Menu to open Menu 21 – Filter Set Configuration.

Step 2. Enter the index of the filter set you wish to configure (in this case, 3) and press [ENTER]. Step 3. Enter a descriptive name or comment in the Edit Comments field (in this case

TELNET_FTP_Web_WAN) and press [ENTER].

Step 4. Press [ENTER] at the message: [Press ENTER to confirm] to open Menu 21.3.1 – Filter Rules Summary.

Step 5. Enter 1 to configure the first filter rule (the only filter rule of this set). Make the entries in this menu as shown in the following figure.

Filter Configuration

7-13