Remington EL-8: 107624-01, EL-8: 107624-02, EL-8: 107625-01, EL-8: 107625-02, EL-8: 111174-01

Page 2

IMPORTANT SAFETY INFORMATION

WARNING: When using an electric chain saw, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

READ ALL INSTRUCTIONS.

Make sure you read and understand all instructions in Important Safety Informa- tion on pages 2 through 4. Improper use of this chain saw can cause severe injury or death from Þre, electrical shock, body contactwithmovingchain,orfallingwood.

BEFORE OPERATING SAW

1.Read and understand this ownerÕs manual be- fore operating chain saw.

2.Watch what you are doing. Use common sense. Do not operate saw when you are tired.

3.Use chain saw for cutting wood only. Do not use chain saw for purpose not intended. Do not use for cutting plastic, masonry, etc.

4.Only well-instructed adults should operate chain saw. Never allow children to operate chain saw.

5.Use only electrical voltage noted on model plate of chain saw.

6.Use only extension cords marked for outdoor use. See page 17 for extension cord requirements.

7.Do not operate chain saw

¥while under the inßuence of alcohol, medica- tion, or drugs

¥in rain or in damp or wet areas

¥where highly ßammable liquids or gases are present

¥if saw is damaged, adjusted wrong, or not fully and securely assembled

¥if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized ser- vice center (see Technical Service, page 21).

¥while in a hurry

¥while in tree or on a ladder unless trained to do so

8.Wear snug-Þtting clothes when operating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain.

9.Wear the following safety gear when operating chain saw.

¥heavy-duty gloves (wear rubber gloves when working outdoors)

¥steel-toed safety footwear with non-skid soles

¥eye protection such as safety glasses, goggles, or face screen

¥safety hard hat

¥ear mufßers or ear plugs

¥hair covering to contain long hair

¥face or dust mask (if working in dusty areas)

10.Before cutting, always provide the following:

¥clear work area

¥secure footing

¥planned retreat path from falling tree

11.Inspect tree before cutting down. Make sure there are no dead limbs or branches that may fall on you.

12.To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the out- let of your extension cord, reverse the plug. If it still does not fit, a polarized extension cord will be necessary. Do not change the plug in any way.

WHILE OPERATING SAW

1.Stay alert. Use common sense while operating chain saw.

2.Keep work area clean. Cluttered areas invite in- juries.

3.Be aware of extension cord while operating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times.

4.Keep children, animals, and bystanders away from chain saw and extension cord. Only chain saw user should be in work area.

5.Do not cut down a tree unless you are trained or have expert help.

6.If two or more persons perform bucking and fell- ing operations at the same time, provide plenty of distance between operations. Provide distance of at least twice the height of tree being felled.

7.Secure wood you are cutting by using clamps or chocks.

8.Grip chain saw Þrmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle.

9.Keep Þnger off trigger until ready to make cut.

10.Before starting chain saw, make sure chain is not touching anything.

11.To guard against electrical shock, avoid body contact with grounded objects such as pipes, fences, and metal posts.

12.Keep all parts of body away from chain when saw is running.

13.Do not force chain saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended.

14.Cut small brush and saplings with extreme care. Slender material may catch in chain and be whipped toward you. This could also pull you off balance.

15.When cutting limb or tree trunk that is under ten- sion, use extreme caution. Be alert for wood springing back. When wood tension is released,

www.desatech.com

2

107705

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Manual Para EL Usuario Manuel D’UTILISATION ET D’ENTRETIEN ListedWhile Operating SAW Important Safety InformationBefore Operating SAW Read ALL InstructionsKickback Maintenance and Storage of Chain SAW Kickback Safety Devices On This SawSaw Maintenance and Kickback Safety ¥ in a dry place Información Importante DE SeguridadAntes DE Utilizar LA Sierra LEA Todas LAS InstruccionesLleve la sierra elŽctrica de un lugar a otro AL Utilizar LA SierraContragolpes ¥ con el dedo fuera del gatilloCuide de su sierra elŽctrica ¥ Nunca la exponga a la lluvia Mantenimiento de la cadena y seguridad contra contragolpesMantenimiento Y Almacenamiento DE SU Sierra ELƒCTRICA Pendant Lutilisation DE LA TRON‚ONNEUSE Consignes DE Sécurité ImportantesAvant Dõutiliser LA TRON‚ONNEUSE ¥ lorsquon est pressŽSuite Entretien ET Remisage DE LA TRON‚ONNEUSE ReculEntretien de la trononneuse et protection contre le recul FIGURES/FIGURAS/FIGURES ¥ Garder vis et Žcrous bien serrŽsFIGURES/FIGURAS/ Figures FIGURES/FIGURAS Bucking Log When Log Is Supported On One End Guide Bar Cross Section Showing Uneven Bar Wear Chain SAW Names and Terms Electric Chain SAWUnpacking Models EL-8 107624-01 107625-01, 107625-02Important Do not clamp chain saw in vise during assembly AssemblySAW Chain Tension Adjustment Extension Cords Filling OIL TankOperating Chain SAW Oiling ChainBefore Felling a Tree Felling Procedure Felling NotchFelling a Tree Cutting Down a Tree Felling CutTrimming a Tree Pruning Limbing a TreeBucking a LOG Care of Guide BAR Cleaning MaintenanceCleaning SAW Body Sharpening SAW ChainReplacement Parts and Accessories Repair Service Technical ServiceIllustrated Parts List StorageTroubleshooting Observed Fault Possible Cause RemedyElectric Chain SAW Limited Warranty Industries of Canada, IncTerminología Sierra EléctricaDesembalaje EnsamblajeAjuste DE Tensión DE LA Cadena Serrada Lubricación USO DE LA Sierra EléctricaProcedimiento de tala Corte de la muesca Tala DE UN çRBOL Derribamiento de un ‡rbolAntes de derribar un ‡rbol Tala finalLa totalidad del tronco sobre el suelo Desmembramiento DE UN çRBOLTrozado DE UN Tronco Corte el tronco comenzando por arriba vea la FiguraTronco apoyado sobre ambos extremos Limpieza Y MantenimientoTronco apoyado en un extremo Poda DE UN çRBOLAfilado DE LA Cadena Lista Ilustrada DE Partes AlmacenamientoServicio Técnico Accesorios Y Piezas DE RepuestoServicio Fuera DE GARANTêA Servicio DE ReparacionesServicio Durante LA GARANTêA SOLUCIîN Diagnóstico Y Resolución DE ProblemasFalla Observada Causa Posible Información DE Garantía GARANTêA Limitada DE Sierra ELƒCTRICAVocabulaire DE LA Tronçonneuse Tronçonneuse Électrique PrimeDéballage MontageRéglage DE LA Tension DE LA Chaîne Remplissage DU Réservoir D’HUILELubrification DE LA CHAëNE Systme de lubrification manuel Utilisation DE LA TronçonneuseRallonges ƒLECTRIQUES Systme de lubrification automatiqueProcŽdure dÕabattage Sifflet dÕabattage Abattage Dõun ArbreAvant dÕabattre un arbre Trait dÕabattageToute la bille repose au sol ƑBRANCHAGETRON‚ONNAGE Dõune Bille La bille est soutenue ˆ une extrŽmitŽNettoyage DU Carter DE TRON‚ONNEUSE Nettoyage ET EntretienTaille Dõun Arbre ƒlagage Entretien DE LA GUIDE-CHAëNERemisage Liste DE Pièces Illustrées Service TechniquePièces DE Rechange ET Accessoires RéparationsCause Possible DépannageDƒFAILLANCE OBSERVƒE REMéDEGarantie LIMITƒE Pour LA TRON‚ONNEUSE ƒLECTRIQUE Information SUR LA GarantieConserver Cette Garantie Replacement PARTS/PARTES DE REPUESTO/ Pièces DE Rechange Parts Company of AmericaMODELS/MODELOS/MODéLES 107624-01 Parts LIST/LISTA DE REPUESTOS/LISTE DES Pièces RenvoiMODELS/MODELOS/MODéLES 107625-01, 107625-02 CLAVE/N DE Parte Continœa/Ë suivre 107705 107705-01 Rev. K 02/03

EL-8: 107624-01, EL-8: 107624-02, EL-8: 107625-01, EL-8: 107625-02, EL-8: 111174-01 specifications

The Remington EL-8 is an innovative line of electric shavers that have caught the attention of grooming aficionados for their precision, technology, and user-friendly design. Within this series, the models EL-8: 107624-01, EL-8: 107624-02, EL-8: 107625-01, EL-8: 107625-02, and EL-8: 111174-01 stand out due to their unique characteristics and features that cater to diverse shaving needs.

The EL-8: 107624-01 is noted for its ergonomic design, which makes it comfortable to hold and easy to manoeuvre. It employs dual blade technology that delivers a close and seamless shave, minimizing skin irritation. This model also features a pivoting head that adapts to the contours of the face, providing an efficient shave even in hard-to-reach areas.

The EL-8: 107624-02 mirrors many of the conveniences of the 107624-01, but it introduces a built-in LED display that provides users with battery status and cleaning notifications. This added tech feature ensures that the shaver remains in peak condition, while its waterproof design allows for easy cleaning under running water, adding to the convenience factor.

Moving on to the EL-8: 107625-01, this model comes with a unique skin protector technology that reduces razor burn during shaving. It is designed with hyper-flex technology that allows for multidirectional movement of the blades, ensuring that every hair is captured in one pass. The synergistic combination of advanced blade design and patented skin protection makes this a top choice for sensitive skin types.

The EL-8: 107625-02 continues the trend by incorporating a fast-charging feature. It can fully charge in under an hour for extensive battery life, making it a reliable option for on-the-go grooming. The smart sensing capability adjusts power based on hair density, further enhancing the overall shave experience.

Lastly, the EL-8: 111174-01 introduces a luxurious touch with its sleek design and premium materials. This model emphasizes a high-performance motor that offers powerful and consistent performance, along with noise reduction technology to create a more pleasant shaving experience. It also features a convenient travel lock, making it ideal for those who travel frequently.

In summary, the Remington EL-8 series—encompassing models 107624-01, 107624-02, 107625-01, 107625-02, and 111174-01—effectively balances advanced technology with user comfort, offering a personalized grooming experience that meets the varying needs of today's modern man. With their combination of innovative features, these shavers redefine the standard for electric shaving, making each user feel confident and at ease.
Top Page Image Contents