Snapper 7800696, 7800580, NXT22875EFCA manual Specifications, Mower, Engine

Page 24

Specifications

Mower

 

Deck Size (in)

 

 

22

 

Height of Cut (in)

 

 

1.25 - 4

 

Transmission Type

 

Variable Speed/Gear

 

Ground Speed (mph)

 

 

0 - 4.2

 

Blade Torque (ft-lbs)

for

 

40

Engine

 

 

 

Gross Engine Power * (ft-lbs)

 

8.75

 

Engine Displacement (cc)

 

190

 

Fuel Tank Capacity (qt)

 

1.2

 

Oil Capacity (oz)

 

18 - 20

 

Spark Plug Gap (in)

 

0.020

 

Not

 

 

Spark Plug Torque (in-lbs)

 

180

 

 

 

 

 

 

Reproduction

 

* Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horse- power values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attach- ments. Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gas engine may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, car- buretor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine- to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

1-800-317-7833 www.snapper.com

Image 24
Contents Not Manual No Rev. BDate of Purchase Retailer EquipmentEngine Reproduction For Operator Safety From Previous ColumnFrom Previous From Previous Column Securely Do not store mower or fuel container inside whereDo not put hands or feet near or under rotating parts Operator Safety Safety and Operation Decals Serious bodily injury or deathExplanation of Operation Decals Features and Controls Contact your dealer if you have questionsVoid he engine warranty Before StartingFuel Recommendations Fuel must meet these requirementsHandle Height Adjustment Operation Starting the MowerPropelling the Mower Stopping the MowerOperation Cutting Height Adjustment Mulching OperationOperation Installing the Grass Bag Re 10 Installing the grass bagOperation Charging the Battery Operation Maintenance Reminder Maintenance Maintenance Chart Emissions ControlMaintenance Change Engine Oil Service Air Filter Recommended. Do not overfillCheck Safety Interlock System Clean Debris Off MowerWashout Port Turn on the water supply to the garden hoseMaintenance Drive Control Adjustment Storage Procedure Fuel SystemFuel tank empty Fill fuel tank with fresh fuel Build-up of debris on or around driveLoose dipstick Battery Determine warranty eligibilityWarranties ReproductionYour Warranty Rights And Obligations Not For Slope Guide Specifications MowerEngine Eproduct ion For Equipo MotorSolución de problemas Garantías Seguridad del usuarioCaracterísticas y mandos Operación MantenimientoSeguridad del usuario Continuación de la columna previaMateriales puede rebotar hacia el usuario Reduzca la velocidad antes de realizar girosLa esté cruzando Camiones cerradosSeguridad del usuario Etiquetas transparentes de Seguridad y funcionamientoProducirse lesiones físicas graves o la muerte Reproduction Explicación del significado de las etiquetas FuncionamientoCaracterísticas y mandos Preguntas que formularOfrecen únicamente como referencias y pueden diferir de Su concreto modelo. Contacte con su distribuidor si tieneAntes de empezar Recomendaciones sobre combustibleOperación Encendido del cortacésped Ajuste de altura del mangoPropulsión del cortacésped Detención del cortacéspedOperación Ajuste de altura de corte Funcionamiento de la desmenuzadoraLos componentes se enfríen Tire de la palanca de ajuste de la altura de corte aOperación Instalación de la bolsa de césped Las bolsas del receptor de césped están fabricadas con telaTejida y están sometidas al deterioro y el desgaste durante Su uso normal. Revise el estado de la bolsa antes de usarlaOperación Carga de la batería Área donde se realiza la carga de la batería. Nunca useCargadores Aumentadores con la batería Mantenga cualquier chispa, llama o fuego al jadosBujía Horas totalesHoras de desactivación Filtro de aireMantenimiento Tabla de mantenimiento Control de emisionesCada 8 horas o diariamente Primeras 5 horas Cada 50 horas o anualmenteFiltro de aire Limpieza de los desechos del CortacéspedPuerto de deslave En 3 segundosMantenimiento Sistema de combustibleSolución de problemas Garantías Reproduction EquipoMotor BateríaAbril Notas Guía DE Inclinaciones InclinaciónEspecificaciones Not Eproduct ion Date d’achat Distributeur ÉquipementMoteur Équipé d’un pare-étincelles, tel que défini dans ManipulationSécurité de l’opérateur Suite de la colonne précédenteFonctionnement Est en marcheSécurité de l’opérateur Autocollants de fonctionnement et De sécuritéLa mort Tondre les pentes de biais, ne pas les monter ni les ’éviter de les blesser PlaceMoins deux 2 minutes avant de faire le plein ’essence Sac à herbe doCaractéristiques et commandes Recommandations de carburant Avant de démarrerFonctionnement Démarrage de la tondeuse Propulsion de la tondeuseArrêt de la tondeuse Fonctionnement Réglage de la hauteur de coupe Fonctionnement Installation du sac à herbe Dépose du bouchon de déchiquetageFonctionnement Recharge de la batterie Point d’accès de recharge de la batterieFonctionnement Aide-mémoire d’entretien Total des heuresHeures de parcours Filtre à air HorlogeEntretien Tableau d’entretien Système de contrôle des émissionsEntretien Entretien du filtre à airEntretien Contrôler le système de verrouillage de sécurité Nettoyage de la tondeusePoint d’accès de rinçage Entretien Réglage de la commande ’entraînementSystème d’alimentation Dépannage Garanties La machine a été modifiée d’uneÉquipement MoteurAvril Reproduction Guide DE Pente Pentes Sur lesSpécifications

NXT22875EFCA, NXT22875E, 7800580, 7800696 specifications

The Snapper 7800580, 7800696, NXT22875EFCA, and NXT22875E are part of a cutting-edge line of outdoor power equipment designed for efficiency and user-friendliness. Tailored for both residential and commercial applications, these models showcase advanced engineering, robust features, and superior technology that cater to a variety of landscaping needs.

The Snapper 7800580 and 7800696 models feature powerful engines that deliver high torque and performance, ensuring that even the toughest mowing tasks are accomplished with ease. They include a self-propelled functionality that enhances maneuverability across various terrains, making them ideal for uneven lawns or large yards. The adjustable cutting height feature provides users with the ability to customize the grass length, leading to a perfect finish every time.

Both models incorporate Snapper’s signature cutting deck design, which optimizes airflow for better mulching, clipping discharge, and bagging. This innovative deck technology also reduces the risk of clogging, allowing for a smoother mowing experience. Additionally, these mowers are equipped with easy-start systems, enabling quick ignition without the hassle of priming.

Transitioning to the NXT22875EFCA and NXT22875E, these models are noted for their brushless motor technology, which provides increased efficiency and longevity compared to traditional motors. The brushless design reduces maintenance needs and extends the overall lifespan of the equipment. With an emphasis on battery-powered operation, both NXT22875 models are designed for low emissions, making them environmentally responsible choices for landscaping enthusiasts.

The NXT22875 series also boasts user-friendly features such as adjustable speed settings, allowing operators to tailor their mowing pace according to the terrain and grass conditions. Further enhancing the user experience, these mowers have ergonomic handles that reduce fatigue during extended use.

Safety is a key consideration in the design of all_four models, with features such as blade brake systems and durable construction that improves stability and reduces the risk of accidents. The combination of technological advancements, user-centric design, and powerful performance makes the Snapper 7800580, 7800696, NXT22875EFCA, and NXT22875E exceptional choices in the realm of outdoor power tools. Whether for professional landscaping or home lawn care, these models deliver quality, reliability, and versatility, meeting the diverse needs of users.