Advanced Menu
The menu bar is shown below.
| Advanced |
Main | |
|
|
|
|
Security
Boot
System
Management
Exit
Table 13 shows the Advanced menu. This menu configures advanced features that are available through the chipset.
Table 13. Advanced Menu
Feature | Options |
Boot | See Table 14 |
Configuration |
|
Description
Configures Plug and Play, Numlock key, and reset Configuration Data on next boot.
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
See Table 15
See Table 16
See Table 18
See Table 19
Configures peripheral ports and devices.
Configures IDE devices.
Configure diskette drive settings.
Configures system event log options.
Table 14. Boot Configuration Submenu
Feature | Options |
Plug & Play O/S | Yes |
| No (default) |
|
|
Reset Config | Yes |
Data | No (default) |
| |
Numlock | Off |
| On (default) |
Description
Specifies if a Plug and Play operating system is being used. “No” lets the BIOS configure all the devices in the system. “Yes” lets the operating system configure Plug & Play (PnP) devices not required for boot if yours system has a Plug and Play operating system.
Clears the BIOS PCI/PnP configuration data stored in Flash on next boot.
Selects the power on state of the Numlock key.
Table 15. Peripheral Configuration Submenu
Feature
Serial Port A
Serial Port B
Legacy USB Support
Options
Auto (default)
Disabled
Enabled
Auto (default)
Disabled
Enabled
Auto
Disabled (default)
Enabled
Description
Disables or enables serial port A.
Disables or enables serial port B.
Disables or enables support for legacy USB.
Configuration Software and Utilities | 57 |