Intel ISP1100 manual IDE Configuration Menu, IDE Configuration Submenu, Options Boot default

Page 58

Table 16.

Feature

IDE Controller

Hard Disk Pre-Delay

Primary IDE Master

IDE Configuration Menu

Options

Boot (default)

Disabled

Primary

Secondary

Disabled (default)

3seconds

6seconds

9seconds

12seconds

15seconds

21seconds

30seconds

If device detected, see Table 17 for IDE configuration options.

Description

“Disabled” disables the integrated IDE Controller. “Primary” enables only the primary IDE Controller. “Secondary” enables the secondary IDE Controller. “Both” enables both IDE Controllers.

Selects the hard disk drive pre-delay. Causes the BIOS to insert a delay before attempting to detect IDE drives in the system.

Configures primary and secondary IDE devices as the name of the drive found or Not Installed.

Reports name of device installed, otherwise displays ”Not Installed.”

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

If device detected, see Table 17 for IDE configuration options.

If device detected, see Table 17 for IDE configuration options.

If device detected, see Table 17 for IDE configuration options.

Reports name of device installed, otherwise displays ”Not Installed.”

Reports name of device installed, otherwise displays ”Not Installed.”

Reports name of device installed, otherwise displays ”Not Installed.”

Table 17.

IDE Configuration Submenu

Feature

Type

LBA Mode Control

Multi-

Sector

Transfers

Options

None

User

Auto (default)

CD-ROM

ATAPI Removable

Other ATAPI

IDE Removable

Disabled

Enabled (default)

Disabled

2sectors

4sectors

8sectors

16 sectors (default)

Description

Specifies the IDE configuration mode for IDE devices.

“User” allows the cylinders, heads, and sectors fields to be changed.

“Auto” automatically fills in the values of the cylinders, heads, and sectors fields.

Enables or disables the LBA mode control.

Specifies the number of sectors per block for transfers in a single interrupt from the hard drive to memory.

Check the hard drive’s specification for optimum setting.

continued

58	Intel ISP1100 Internet Server Product Guide

Image 58

Contents Intel ISP1100 Internet Server Product Guide Disclaimer Contents Configuration Software and Utilities Figures Tables System Components System ComponentsFeature Server Board FeaturesServer Board Features DescriptionServer Board Connectors and Components Server Board Connectors and ComponentsFront Panel Controls, Connectors, and IndicatorsBack Panel Memory ProcessorsSupported Processors Memory Error Detection Mode Supported Memory CharacteristicsDimm Type ECC Disabled ECC Enabled Chipset Universal Serial BusReal-Time Clock, Cmos SRAM, and Battery IDE SupportSerial Ports ControllerDiskette Drive Controller Fan Tachometer MUX Control Mapping Hardware MonitorKeyboard and Mouse Interface FanMUXCTL0 FanMUXCTL1 Heceta FAN1TACH InputIntel Pro/100+ Server 82559 Ethernet Controllers Scsi Hard Drive LED ConnectorWake on LAN Wake on Ring Wake on Ring/Resume on RingResume on Ring Speaker Power ConnectorSMI and NMI Routing SMI and NMI RoutingFan Support Fan Connector DescriptionsConnector FunctionBefore You Begin FCC/Emissions DisclaimerElectrostatic Discharge ESD and ESD Protection Rackmount Precautions Tools and Supplies Needed Safety and Regulatory RequirementsSafety Compliance Removing the Server From the RackInstalling the Server in the Rack Removing/Installing the Server in the RackRemoving the Cover Replacing the CoverRemoving the Processor Removing the Processor Heat SinkInstalling the Processor Removing the Processor ChipRemoving the Processor Fan If Applicable Removing the Processor FanInstalling the Processor Chip Installing the Processor ChipInstalling the Processor Heat Sink Installing the Processor Heat SinkRemoving the Dimm Boards Removing the Dimm BoardsInstalling the Dimm Boards Installing the Dimm BoardsRemoving the Hard Drives Removing the Hard DrivesInstalling the Hard Drives Installing the Hard Drive in the Mounting BracketInstalling the Hard Drive in the Drive Bay Installing the Hard Drive in the Drive BayRemoving the 3.5-inch Diskette Drive Removing the 3.5-inch Diskette DriveInstalling the 3.5-inch Diskette Drive Installing the Drive in the Mounting BracketInstalling the 3.5-inch Diskette Drive in the Drive Bay Installing the 3.5-inch Diskette Drive in the Drive BayRemoving the PCI Add-in Cards Removing the Filler Panel Retention BracketRemoving the Riser and Add-in Cards Removing the Riser and Add-in CardsRemoving the Add-in Cards From the Riser Removing the Add-in Cards from the RiserInstalling the Rear I/O Filler Panels Installing the Rear I/O Filler PanelsInstalling PCI Add-in Cards Removing the Riser CardRemoving/Installing Server Components Installing the Add-in Cards on the Riser Installing the Add-in Cards on the RiserRemoving the Rear I/O Filler Panels Removing the Rear I/O Filler PanelsInstalling the Riser and Add-in Cards Installing the Riser and Add-in CardsReplacing the Back-up Battery VarningReplacing the Lithium Back-up Battery Power Up the Server Power Cord RequirementsPowering Up the Server Removing/Installing Server Components Hot Keys Power-On Self-Test PostConfiguration Utilities Hot KeysBios Setup Function Keys Using Bios SetupBios Setup Menu Bar DescriptionAdvanced Main MenuMain Menu Peripheral Configuration Submenu Advanced Menu Feature OptionsBoot Configuration Submenu Advanced MenuOptions Boot default IDE Configuration MenuIDE Configuration Submenu Sectors default DescriptionOptions Auto default Disabled default Diskette Configuration SubmenuEvent Log Configuration Submenu 44/1.25MB 3.5 defaultBoot Menu Boot MenuBoot Security MenuPower On default Stay Off default Last State defaultStay Off default 1st IDE defaultSystem Management System Management MenuSystem Management Menu Exit Menu Upgrading the BiosPreparing for the Upgrade Exit MenuObtaining the Upgrade Utility Performing the Upgrade Recovering the BiosIntel ISP1100 Internet Server Product Guide Configuration Software and Utilities Initial System Startup Resetting the SystemChecklist PressRunning New Application Software After the System Has Been Running CorrectlyMonitoring Post More Problem Solving ProceduresPreparing the System for Diagnostic Testing Verifying Proper Operation of Key System LightsPower Light Does Not Light Specific Problems and Corrective ActionsNo Characters Appear on Screen System Cooling Fans Do Not Rotate Properly Characters Are Distorted or IncorrectDiskette Drive Activity Light Does Not Light CD-ROM Drive Activity Light Does Not Light Hard Disk Drive Activity Light Does Not LightCannot Connect to a Server Problems with Application Software Problems with NetworkError Codes and Error Messages Bootable CD-ROM Is Not DetectedError and Informational Messages Beeps Error messageError Messages Description OFF Board Parity Error Addr = Index Post Intel ISP1100 Internet Server Product Guide Index