PCI-X Layout Guidelines
8.6.3PCI-X 66 MHz Embedded Topology
Figure 19 and Table 12 provide routing details for a topology with an embedded PCI-X 66 MHz application.
Figure 19. PCI-X 66 MHz Embedded Routing Topology
| EM1 | EM3 | EM5 | EM7 |
| TL EM1 | TL EM3 | TL EM5 | TL EM7 |
TL1 | TL2 | TL3 |
| TL4 |
| TL EM2 | TL EM4 | TL EM6 | TL EM8 |
| EM2 | EM4 | EM6 | EM8 |
|
|
|
| B2721 |
Table 12. |
| |
|
|
|
| Parameter | Routing Guideline for Lower AD Bus |
|
|
|
| Reference Plane | Route over an unbroken ground plane |
|
|
|
| Board Impedance | 60 Ω +/- 15% |
|
|
|
| Stripline Trace Spacing | 12 mils edge to edge |
|
|
|
| Microstrip Trace Spacing | 18 mils, edge to edge |
|
|
|
| Break Out | 5 mils on 5 mils. Maximum length of breakout region can be 500 mils |
|
|
|
| Group Spacing | Spacing from other groups: 25 mils min, edge to edge |
|
|
|
| Trace Length 1 (TL1): From |
|
| 41110 signal Ball to first | 1.0” - 5.0” max |
| junction |
|
|
|
|
| Trace Length TL2 to TL4 - | 1.0” min - 2.5” max |
| between junctions | |
|
| |
| Trace Length TL_EM1 to |
|
| TL_EM8 from junction | 2.0” min - 3.0” max |
| connector to the embedded | |
|
| |
| device |
|
|
|
|
| Length Matching | Clocks coming form the clock driver must be length matched to within 25 mils |
| Requirements: | and routed identical in layers. |
|
|
|
| Number of vias | 4 vias max. |
|
|
|
38 | Intel® 41110 Serial to Parallel PCI Bridge Design Guide |