VinylJet 36TM Reference Guide
➪To choose print quality
1Press Setup/Print Mode/Quality Mode.
2Choose the desired quality.
3Press OK.
Choosing feed media options
Feed media options allow you to:
•advance the media*
•display/enter Media Counter values
*Media feeding and loading are described in the Quick Start Guide.
Media counter
Media Counter gives you a means of estimating the amount of media left on a roll. When a new roll of media, or a used roll where the remaining length is known, is installed on the printer, you can enter the length of the roll into the printer's front panel display. As the printer prints, this amount is decremented. You can view the estimated amount of media remaining on the printer's front panel display. When you are ready to remove the roll, you can print the estimated amount of media remaining on the roll. When you reload this media, you can use this figure to enter into the printer's front panel display. The media counter can be reset to 0 to avoid confusion if it is not being used. The media counter will not decrement below 0. The current value of the media counter is main- tained across power cycles but is not stored as a user parameter.
➪To enter a media length value
1Press Feed Media/Media Counter.
2Set the media length.
3Press OK.
Printer Options