Kodak Printe To save user setup, To use a previously saved user setting, Choosing a language

Page 18

VinylJet 36TM Reference Guide

➪

➪

To save user setup

1Press Setup/User Setup/Save User.

2Scroll to the number for the user settings.

3Press OK.

To use a previously saved user setting

1Press Setup/User Setup/Select User.

2Scroll to the number for the user settings (i.e., user 1, user 2, etc.) to use.

3Press OK.

Choosing a language

Printer menus and options can be displayed in the following languages: English, German, French, Italian, Portuguese, Spanish, traditional and simplified Chinese, Japanese, and Korean.

➪To choose a language

1Press Setup/User Setup/Language.

2Choose the language to display.

3Press OK.

Printing the settings

Pressing the SetupMenu/User Setup Menu/Print Settings buttons causes the printer to print a listing of its current settings and configuration. Be sure to have media loaded before you start.

Returning to the default settings

Pressing the Setup Menu/User Setup Menu/Init Settings buttons returns all printer options to the factory defaults. All saved user settings are lost. The table at the end of this chapter shows the printer defaults.

2-6 Printer Options

Image 18

Contents Text P/N Revision HistoryWarranty Claims FCC Statement U.S.A VDE statementMaterial safety data sheet General operating safetyIndustry Canada For your safety Manual conventions Other reference materialsContents Appendix E Troubleshooting Appendix a Installing additional memoryAppendix C Technical information Appendix D Error messages Appendix B Menu treePrinter setup Printing Obtaining quality resultsUse the right inks and media Caring for your ink and cartridges Choose the right mediaCaring for your media Choose the correct printing mode Use the right softwarePrinter options Returning to the default settingsPrinting the settings Important notes about image size vs. dpiColor mode To choose the color modeChoosing quality mode options Media counter To choose print qualityChoosing feed media options To enter a media length valueTo set auto-load delay To reset the media counterAuto-load delay To display the current valueTo turn off Save Media Defining user setupSave media Auto-WipeChoosing a language To save user setupTo use a previously saved user setting To choose a languageTo set LCD contrast Choosing ink optionsTo set ink reduction To set the ink preheat time To set dry EOPPrinter default settings User Settings Default Other OptionsTo print a file using the Windows driver PrintingEnd of Print function Printing modes Printing vector dataPalette select Accessing HP-GL/2 featuresTo access HP-GL/2 features To choose a palette typeControl RotationTo set control Reprints To rotate the imageTo make multiple prints Nesting To enable nesting Nest timeTo define nesting wait time To enable the ink limit Ink limitAcceptable Simm sizes Installing additional memorySimm installation To remove the right coverTo install the new Simm To remove the SIMMsMenu tree Main menu at a glanceMain menu Feed media menuSetup menu at a glance Bold indicates the default Utility menu at a glance Bold indicates the default Setup menu Print ModeHP-GL/2 Menu Ink Option Menu Serial Comm Menu Bold indicates the default Utility menuPrime menu Service Menu Bold indicates the default Technical information Media Roll ParametersTechnical information C-2 Error messages Cartridge errorsMemory Errors TroubleshootingE Troubleshooting quick listIsolating problems Printer health File will not print Printer front view Ink cartridges do not fire properly Firmware Download Procedure Upgrade/Printer Refresh Overall print quality is poor Calibrate cartridges Data Transfer No output when printing from Unix Application Software Difficulty generating prints ranging from a to D size Calling for Help Customer Technical Support