Kodak Printe To display the current value, To print the current value, To reset the media counter

Page 16

VinylJet 36TM Reference Guide

➪

➪

➪

To display the current value

1Press Feed Media/Display Counter.

2View the current value.

3Press EXIT.

To print the current value

1Press Feed Media/Display Counter.

2Press Print Counter.

3Press EXIT.

To reset the media counter

1Press Feed Media/Media Counter.

2Press Reset Counter.

3Press OK.

Choosing paper options

Paper options let you define the following:

• Auto-Load Delay • Save Media • Auto-Wipe

Auto-load delay

Auto-Load Delay lets you set the time between when the printer senses the media and when printing starts. This lets you manually reposition the media if necessary. The default is 6 seconds, selectable from a range of 1-12 seconds.

➪To set auto-load delay

1Press Setup/Paper Option/Auto-Load Delay.

2Choose the delay time.

3Press OK.

2-4 Printer Options

Image 16

Contents Text P/N Revision HistoryWarranty Claims FCC Statement U.S.A VDE statementGeneral operating safety Material safety data sheetIndustry Canada For your safety Manual conventions Other reference materialsContents Appendix a Installing additional memory Appendix C Technical information Appendix D Error messagesAppendix E Troubleshooting Appendix B Menu treePrinter setup Obtaining quality results PrintingUse the right inks and media Choose the right media Caring for your ink and cartridgesCaring for your media Choose the correct printing mode Use the right software Returning to the default settings Printing the settings Printer options Important notes about image size vs. dpiTo choose the color mode Color modeChoosing quality mode options To choose print quality Choosing feed media optionsMedia counter To enter a media length valueTo reset the media counter Auto-load delayTo set auto-load delay To display the current valueDefining user setup Save mediaTo turn off Save Media Auto-WipeTo save user setup To use a previously saved user settingChoosing a language To choose a languageChoosing ink options To set LCD contrastTo set ink reduction To set the ink preheat time To set dry EOPPrinter default settings User Settings Default Other OptionsTo print a file using the Windows driver PrintingEnd of Print function Printing modes Printing vector dataAccessing HP-GL/2 features To access HP-GL/2 featuresPalette select To choose a palette typeRotation ControlTo set control To rotate the image ReprintsTo make multiple prints Nesting Nest time To enable nestingTo define nesting wait time To enable the ink limit Ink limitInstalling additional memory Simm installationAcceptable Simm sizes To remove the right coverTo install the new Simm To remove the SIMMsMenu tree Main menu at a glanceMain menu Feed media menuSetup menu at a glance Bold indicates the default Utility menu at a glance Bold indicates the default Setup menu Print ModeHP-GL/2 Menu Ink Option Menu Serial Comm Menu Bold indicates the default Utility menuPrime menu Service Menu Bold indicates the default Technical information Media Roll ParametersTechnical information C-2 Error messages Cartridge errorsMemory Errors Troubleshooting quick list TroubleshootingEIsolating problems Printer health File will not print Printer front view Ink cartridges do not fire properly Firmware Download Procedure Upgrade/Printer Refresh Overall print quality is poor Calibrate cartridges Data Transfer No output when printing from Unix Application Software Difficulty generating prints ranging from a to D size Calling for Help Customer Technical Support