Kodak Printe manual Ink Option Menu

Page 39

	VInylJet 36TM Reference Manual

Ink Option Menu
Ink reduction	(applies to HPGL/2 only) provides access to a further menu in which to
	set the percentage by which to decrease the amount of ink emitted to
	help prevent bleeding or pooling of ink. Options are 0, 12.5, 25, 37.5,
	and 50.
Ink preheat	provides access to a further menu in which you can select the car-
	tridge for which you want to set the preheat value. Then you can set
	the ink preheat value for each cartridge. Options are -7 (off) to 7 (max)
	(default = 0).
EOP_Dry	EOP (End of page drying) ON enables the printer at the completion of
	the print job to automatically advance the media at the printing speed
	12 inches to fully pass the IR heater. The media is then fed back into
	the printer at 25% of the normal reserve speed to avoid cockling on
	the retract move. End of Page dry OFF does not perform this at job
	completion and should be used when multiple copies are being
	printed.
Exit	returns to the Setup menu.

Menu Tree B-7

Image 39

Contents Revision History Text P/NWarranty Claims VDE statement FCC Statement U.S.AMaterial safety data sheet General operating safetyIndustry Canada For your safety Other reference materials Manual conventionsContents Appendix B Menu tree Appendix a Installing additional memoryAppendix C Technical information Appendix D Error messages Appendix E TroubleshootingPrinter setup Printing Obtaining quality resultsUse the right inks and media Caring for your ink and cartridges Choose the right mediaCaring for your media Use the right software Choose the correct printing modeImportant notes about image size vs. dpi Returning to the default settingsPrinting the settings Printer optionsColor mode To choose the color modeChoosing quality mode options To enter a media length value To choose print qualityChoosing feed media options Media counterTo display the current value To reset the media counterAuto-load delay To set auto-load delayAuto-Wipe Defining user setupSave media To turn off Save MediaTo choose a language To save user setupTo use a previously saved user setting Choosing a languageTo set LCD contrast Choosing ink optionsTo set ink reduction To set dry EOP To set the ink preheat timeUser Settings Default Other Options Printer default settingsPrinting To print a file using the Windows driverEnd of Print function Printing vector data Printing modesTo choose a palette type Accessing HP-GL/2 featuresTo access HP-GL/2 features Palette selectControl RotationTo set control Reprints To rotate the imageTo make multiple prints Nesting To enable nesting Nest timeTo define nesting wait time Ink limit To enable the ink limitTo remove the right cover Installing additional memorySimm installation Acceptable Simm sizesTo remove the SIMMs To install the new SimmMain menu at a glance Menu treeFeed media menu Main menuSetup menu at a glance Bold indicates the default Utility menu at a glance Bold indicates the default Print Mode Setup menuHP-GL/2 Menu Ink Option Menu Utility menu Serial Comm Menu Bold indicates the defaultPrime menu Service Menu Bold indicates the default Media Roll Parameters Technical informationTechnical information C-2 Cartridge errors Error messagesMemory Errors TroubleshootingE Troubleshooting quick listIsolating problems Printer health File will not print Printer front view Ink cartridges do not fire properly Firmware Download Procedure Upgrade/Printer Refresh Overall print quality is poor Calibrate cartridges Data Transfer No output when printing from Unix Application Software Difficulty generating prints ranging from a to D size Calling for Help Customer Technical Support