Kodak Printe manual Nest time, To enable nesting, To define nesting wait time

Page 29

VinylJet 36TM Reference Guide

The following parameters will not affect nesting:

•Ink limiting;

•Replots;

•If Auto Rotation is enabled, then the nesting algorithm is free to rotate the plot if it determines that doing so will save media. Plots are sequen- tially fitted across the page from right to left; and

•The HP-GL/2 EC command can be used to control cutting. If any plot in a nest has the cutter enabled, the plotter will cut after the nest.

➪To enable nesting

1From themainmenu, chooseSetup Menu/HP-GL/2 Options/Nest Enable.

2Press Select.

3Use the up or down arrow button to display Nest On or Off.

4Press Select.

Nest time

Nest time is the amount of time the printer waits for the next plot to fill the current nest.

The printer will begin printing whenever the printer has been idle for the speci- fied time interval. The time is reset whenever a print job is received.

➪To define nesting wait time

1From the main menu, choose Setup Menu/HP-GL/2 Options/Nest Time.

2Press Select.

3Use the up or down arrow button to display the desired nest time.

4Press Select.

4-6 HP-GL/2

Image 29

Contents Revision History Text P/NWarranty Claims VDE statement FCC Statement U.S.AIndustry Canada Material safety data sheetGeneral operating safety For your safety Other reference materials Manual conventionsContents Appendix C Technical information Appendix D Error messages Appendix a Installing additional memoryAppendix E Troubleshooting Appendix B Menu treePrinter setup Use the right inks and media PrintingObtaining quality results Caring for your media Caring for your ink and cartridgesChoose the right media Use the right software Choose the correct printing modePrinting the settings Returning to the default settingsPrinter options Important notes about image size vs. dpiChoosing quality mode options Color modeTo choose the color mode Choosing feed media options To choose print qualityMedia counter To enter a media length valueAuto-load delay To reset the media counterTo set auto-load delay To display the current valueSave media Defining user setupTo turn off Save Media Auto-WipeTo use a previously saved user setting To save user setupChoosing a language To choose a languageTo set ink reduction To set LCD contrastChoosing ink options To set dry EOP To set the ink preheat timeUser Settings Default Other Options Printer default settingsPrinting To print a file using the Windows driverEnd of Print function Printing vector data Printing modesTo access HP-GL/2 features Accessing HP-GL/2 featuresPalette select To choose a palette type To set control Control Rotation To make multiple prints ReprintsTo rotate the image Nesting To define nesting wait time To enable nestingNest time Ink limit To enable the ink limitSimm installation Installing additional memoryAcceptable Simm sizes To remove the right coverTo remove the SIMMs To install the new SimmMain menu at a glance Menu treeFeed media menu Main menuSetup menu at a glance Bold indicates the default Utility menu at a glance Bold indicates the default Print Mode Setup menuHP-GL/2 Menu Ink Option Menu Utility menu Serial Comm Menu Bold indicates the defaultPrime menu Service Menu Bold indicates the default Media Roll Parameters Technical informationTechnical information C-2 Cartridge errors Error messagesMemory Errors Isolating problems TroubleshootingETroubleshooting quick list Printer health File will not print Printer front view Ink cartridges do not fire properly Firmware Download Procedure Upgrade/Printer Refresh Overall print quality is poor Calibrate cartridges Data Transfer No output when printing from Unix Application Software Difficulty generating prints ranging from a to D size Calling for Help Customer Technical Support