Kodak Printe manual Utility menu, Serial Comm Menu Bold indicates the default

Page 40

VInylJet 36TM Reference Manual

Serial Comm Menu (Bold indicates the default)

For use by technical support only.

Baud rate	provides access to a further menu to select the baud rate: 9600
	(default), 19200, 38400.
Data bits	7, 8
Parity bits	provides access to a further menu to select parity: None (default),
	Even, Odd.
Exit	returns to the Setup menu.

Utility menu

Prime Menu	provides access to further selections for prime single, prime all, start
	routine, and clean.
Access Cartridge	moves the ink carriage away from the service station for installing and
	replacing cartridges and the media cutter.
Color Calib Menu	provides access to further menus for printing the color calibration test
	pattern and for entering values determined by examining the test
	patterns.
Calibration Menu	provides access to a further menu for calibration options and diagnos-
	tics.
Display Settings	displays information such as media and page width and height, on
	time, and cumulative plot time.
Print Settings	prints information such as media size, firmware revision, RAM size,
	and plot hours.
Service Menu	provides access to the Service menu (technical support only)
Exit	returns to the Main menu.

B-8 Menu Tree

Image 40

Contents Text P/N Revision HistoryWarranty Claims FCC Statement U.S.A VDE statementGeneral operating safety Material safety data sheetIndustry Canada For your safety Manual conventions Other reference materialsContents Appendix a Installing additional memory Appendix C Technical information Appendix D Error messagesAppendix E Troubleshooting Appendix B Menu treePrinter setup Obtaining quality results PrintingUse the right inks and media Choose the right media Caring for your ink and cartridgesCaring for your media Choose the correct printing mode Use the right softwareReturning to the default settings Printing the settingsPrinter options Important notes about image size vs. dpiTo choose the color mode Color modeChoosing quality mode options To choose print quality Choosing feed media optionsMedia counter To enter a media length valueTo reset the media counter Auto-load delayTo set auto-load delay To display the current valueDefining user setup Save mediaTo turn off Save Media Auto-WipeTo save user setup To use a previously saved user settingChoosing a language To choose a languageChoosing ink options To set LCD contrastTo set ink reduction To set the ink preheat time To set dry EOPPrinter default settings User Settings Default Other OptionsTo print a file using the Windows driver PrintingEnd of Print function Printing modes Printing vector dataAccessing HP-GL/2 features To access HP-GL/2 featuresPalette select To choose a palette typeRotation ControlTo set control To rotate the image ReprintsTo make multiple prints Nesting Nest time To enable nestingTo define nesting wait time To enable the ink limit Ink limitInstalling additional memory Simm installationAcceptable Simm sizes To remove the right coverTo install the new Simm To remove the SIMMsMenu tree Main menu at a glanceMain menu Feed media menuSetup menu at a glance Bold indicates the default Utility menu at a glance Bold indicates the default Setup menu Print ModeHP-GL/2 Menu Ink Option Menu Serial Comm Menu Bold indicates the default Utility menuPrime menu Service Menu Bold indicates the default Technical information Media Roll ParametersTechnical information C-2 Error messages Cartridge errorsMemory Errors Troubleshooting quick list TroubleshootingEIsolating problems Printer health File will not print Printer front view Ink cartridges do not fire properly Firmware Download Procedure Upgrade/Printer Refresh Overall print quality is poor Calibrate cartridges Data Transfer No output when printing from Unix Application Software Difficulty generating prints ranging from a to D size Calling for Help Customer Technical Support