Kodak Printe manual Control, Rotation, To set control

Page 26

VinylJet 36TM Reference Guide

Control

Control determines whether certain printing parameters are set in the software application or overridden by the printer's front panel. Control overrides the following parameters of the HP-GL/2 header file: repeat plot (RP) and enable auto cutter (EC).

Repeat Plot: With Control set to Printer, the printer will ignore RP commands in the plot file and only print one plot. From the printer's front panel you can specify additional copies using the Reprints menu.

Enable Auto Cutter: With Control set to Printer, the printer will ignore EC commands in the plot file and will not automatically cut after each plot. From the printer's front panel, you can enable automatic cutting or initiate a command for a single cut.

Do not override software control when sending merged raster/vector data to the printer.

To set control

1From the main menu, choose Setup Menu/HP-GL/2 Options/Control.

2Press Select.

3Use the up or down arrow button to display either Software or Printer.

4Press Select.

Rotation

The printer automatically prints an image with the long side on the paper axis. To better fit images and save media, you can use the Rotation option to turn vector files counterclockwise 90 degrees at a time. If the rotation specified won't fit on the media or contains raster images, it will not be rotated. When the Rotate value is set to AUTO, the algorithm will automatically rotate the plot if it determines that the rotation will save media (regardless of whether Nesting is enabled). If Rotate is set to 0, the plot will not be rotated. The Control function does not override the RO command in the plot file.

Note: Rotation is supported for HP-GL/2 files only. It is not supported for RTL files.

HP-GL/2 4-3

Image 26
Contents Text P/N Revision HistoryWarranty Claims FCC Statement U.S.A VDE statementIndustry Canada Material safety data sheetGeneral operating safety For your safety Manual conventions Other reference materialsContents Appendix E Troubleshooting Appendix a Installing additional memoryAppendix C Technical information Appendix D Error messages Appendix B Menu treePrinter setup Use the right inks and media PrintingObtaining quality results Caring for your media Caring for your ink and cartridgesChoose the right media Choose the correct printing mode Use the right softwarePrinter options Returning to the default settingsPrinting the settings Important notes about image size vs. dpiChoosing quality mode options Color modeTo choose the color mode Media counter To choose print qualityChoosing feed media options To enter a media length valueTo set auto-load delay To reset the media counterAuto-load delay To display the current valueTo turn off Save Media Defining user setupSave media Auto-WipeChoosing a language To save user setupTo use a previously saved user setting To choose a languageTo set ink reduction To set LCD contrastChoosing ink options To set the ink preheat time To set dry EOPPrinter default settings User Settings Default Other OptionsTo print a file using the Windows driver PrintingEnd of Print function Printing modes Printing vector dataPalette select Accessing HP-GL/2 featuresTo access HP-GL/2 features To choose a palette typeTo set control ControlRotation To make multiple prints ReprintsTo rotate the image Nesting To define nesting wait time To enable nestingNest time To enable the ink limit Ink limitAcceptable Simm sizes Installing additional memorySimm installation To remove the right coverTo install the new Simm To remove the SIMMsMenu tree Main menu at a glanceMain menu Feed media menuSetup menu at a glance Bold indicates the default Utility menu at a glance Bold indicates the default Setup menu Print ModeHP-GL/2 Menu Ink Option Menu Serial Comm Menu Bold indicates the default Utility menuPrime menu Service Menu Bold indicates the default Technical information Media Roll ParametersTechnical information C-2 Error messages Cartridge errorsMemory Errors Isolating problems TroubleshootingETroubleshooting quick list Printer health File will not print Printer front view Ink cartridges do not fire properly Firmware Download Procedure Upgrade/Printer Refresh Overall print quality is poor Calibrate cartridges Data Transfer No output when printing from Unix Application Software Difficulty generating prints ranging from a to D size Calling for Help Customer Technical Support