Message | Meaning | Suggested solutions | |
|
|
| |
LSU Motor Error | A problem has | Unplug the power | |
Cycle Power | occurred in the LSU | cord and plug it back | |
| (Laser Scanning | inches. If the | |
| Unit). | problem persists, | |
|
| please call for | |
|
| service. | |
|
|
| |
Main Motor | There is a problem | Open and then close | |
Locked | in the main motor. | the front cover. | |
|
|
| |
Open Heat Error | There is a problem | Unplug the power | |
Cycle Power | in the fuser unit. | cord and plug it back | |
|
| in. If the problem | |
|
| persists, please call | |
|
| for service. | |
|
|
| |
Over Heat Error | There is a problem | Unplug the power | |
Cycle Power | in the fuser unit. | cord and plug it back | |
|
| in. If the problem | |
|
| persists, please call | |
|
| for service. | |
|
|
| |
Paper Jam 0 | Paper has jammed | Clear the jam. See | |
Open/Close Door | in the feeding area | page 9.1 and | |
of the tray. | page 9.1. | ||
| |||
|
|
| |
Paper Jam 1 | Paper has jammed | Clear the jam. See | |
Open/Close Door | in the fuser area. | page 9.3. | |
|
| ||
|
|
| |
Paper Jam 2 | Paper has jammed | Clear the jam. See | |
Check Inside | in the paper exit | page 9.3. | |
area. |
| ||
|
| ||
|
|
| |
| The printer is |
| |
Printing... | printing jobs using | Complete your | |
the displayed | printing. | ||
| |||
| language. |
| |
|
|
| |
Ready | The printer is | Use your printer. | |
and ready to printer. | |||
|
| ||
|
|
| |
Self Diagnostic | The LSU(Laser | Please wait a few | |
LSU | Scanning Unit) in | minutes. | |
| your printer is |
| |
| checking some |
| |
| problems detected. |
| |
|
|
| |
Self Diagnostic | The engine in your | Please wait a few | |
Temperature | printer is checking | minutes. | |
| some problems |
| |
| detected. |
| |
|
|
| |
|
| When data is | |
Sleeping... | The printer is on | received, it switches | |
power save mode. | to | ||
| |||
|
| automatically. | |
|
|
|
Message | Meaning | Suggested solutions |
|
|
|
Tray 1 | There is no paper in | Load paper in the |
Paper Empty | the tray 1. | tray 1. See page 5.5. |
|
|
|
Tray 2 | There is no paper in | Load paper in the |
Paper Empty | the optional tray 2. | optional tray 2. See |
|
| page 5.5. |
|
|
|
9.7 <Troubleshooting>