Xerox 3435DN manual Custom Installation

Page 66

NOTE: If your printer is not already connected to the computer, the following window will appear.

•After connecting the printer, click Next.

•If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

•The installation window that appears in this User’s Guide may differ depending on the printer and interface in use.

5After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next.

Otherwise, just click Next and skip to step 7.

6If the test page prints out correctly, click Yes. If not, click No to reprint it.

7Click Finish.

NOTE: After setup is complete, if your printer driver doesn’t work properly, reinstall the printer driver. See "Reinstalling Printer Software" on page 10.

Custom Installation

You can choose individual components to install.

1Make sure that the printer is connected to your computer and powered on.

2Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window appears.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

If you use Windows Vista, click Start → All programs → Accessories → Run, and type X:\Setup.exe.

If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.

3Click Install Software.

4Select Custom installation. Click Next.

5

Installing Printer Software in Windows

Image 66

Contents Page Page Contents Installing accessories MaintenanceTroubleshooting SpecificationsSafety Electrical Safety Information Regulatory Information OpenSSL License Environmental Compliance Product Recycling and Disposal Special features IntroductionFeatures Phaser 3435/DN Printer overviewFront view Rear view Control panel overview Understanding the Status LED Finding more informationSelecting a location Clearance spaceAccessing control panel menus System setupUsing control panel menus Menu overviewInformation menu Layout menuPaper menu System Setup menu Graphic menuEmulation menu Network menu PostScriptPrinting a demo Using toner save modeUsing the control panel button Changing the display languageSoftware overview Supplied softwareWindows Printer driver featuresSystem requirements Mac OSSupported operating systems Network setupVia network administration programs Via the control panelSetting Ethernet speed Configuring TCP/IPConfiguring EtherTalk Restoring the network configurationPrinting a network configuration ConfiguringConfiguring CentreWare is Loading print media Selecting print mediaType Size Dimensions Weighta Capacityb Supported sizes of paperGuidelines for selecting and storing print media Guidelines for special print mediaMedia type Guidelines Loading paper Using the tray 1 or the optional tray Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose traySelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Basic printing Canceling a print jobPrinting a document Canceling a print job Printing a documentHow to purchase Ordering supplies and accessoriesAccessories Print cartridgesCleaning the outside of the printer MaintenanceCleaning the printer Cleaning the inside of the printerMaintaining the print cartridge Checking the remaining tonerToner Low appears on the display Redistributing print cartridgeReplacing the print cartridge Open the front coverMaintenance parts Clearing the Toner Low Replace Toner messageItems Yield Average Paper feed area TroubleshootingClearing paper jams TrayOptional tray Multi-purpose trayAround the print cartridge Paper exit areaDuplex unit area Duplex jamTips for avoiding paper jams Troubleshooting checklist Understanding display messagesOver Heat Error Message Meaning Suggested solutions LSU Motor ErrorOpen Heat Error Self DiagnosticPrint cartridge-related messages Select Xerox Phaser 3435 as Solving general printing problemsCondition Possible cause Suggested solutions Software Section. TrySelect Download as Bit Image Advanced OptionsTurn on Print As Image from Solving print quality problems Misformed Condition Suggested solutions BackScatter CharactersCommon Windows problems Common PostScript problemsCommon Linux problems Common Macintosh problemsInstalling a memory Dimm Installing accessoriesPrecautions when installing accessories Disconnect the power cordSetting the memory in the PostScript printer properties Printer specifications SpecificationsPrinter specifications Specifications and DescriptionIndex Windows Toner save mode, use Windows problems Software section Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Installing Printer Software in Windows Installing Printer SoftwareInstalling Software for Local Printing Custom Installation Installing Printer Software in Windows Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Removing Printer SoftwareUsing SetIP Installing SetIPUsing SetIP Basic Printing Printing a DocumentSelect your printer driver from the Name drop-down list Printer Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Layout Tab Paper TabGraphics Tab Extras Tab Using Help Troubleshooting TabUsing a Favorite Setting Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document Selected Paper SizeCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayUsing Windows PostScript Driver AdvancedOpening the Troubleshooting Guide Using Utility ApplicationsUsing Printer Settings Utility Changing the Status Monitor Program SettingsSharing the Printer Locally Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxInstalling the Unified Linux Driver Using Your Printer in LinuxInstalling the Unified Linux Driver Getting StartedUninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Double-clickUnified Driver Configurator on the desktopConfiguring Printer Properties Ports ConfigurationPrinting from Applications Printing FilesFile menu Uninstalling the printer driver Using Your Printer with a MacintoshInstalling printer driver for Macintosh Click Continue Select Easy Install and click InstallFor a USB-connected Macintosh Setting Up the PrinterFor a Network-connected Macintosh Select your printer namePrinting a Document Installable OptionsPrinting Click Show InfoChanging Printer Settings LayoutPrinting Multiple Pages on One Sheet of Paper Duplex PrintingIndex