Graphic menu
Use the Graphic menu to change settings affecting the quality of the printed characters and images.
Item | Explanation |
|
|
Resolution | Values: |
|
Specify the number of dots printed per inch (dpi). The higher the setting, the sharper printed characters and graphics.
•If your print jobs are mostly text, select 600dpi- Normal for the highest quality printing.
•Select
Darkness
Values: Plain, Light, Dark
You can lighten or darken the print on the page by changing the toner density setting. The Plain setting usually produces the best result. Use the Light toner density setting to save toner.
System Setup menu
Use the System Setup menu to configure a variety of printer features.
Item | Explanation |
|
|
Language | Values: English, FRANCAIS, Espanol, |
| |
| Portugues B., Deutsch, Italiano... |
This setting determines the language of the text that appears on the control panel display and information printing.
Power Save
Values: [ 5 ] Min, [ 10 ] Min, [ 15 ] Min, [ 20 ]
Min, [ 30 ] Min, [ 60 ] Min, [ 120 ] Min
When the printer does not receive data for an extended period of time, power consumption is automatically lowered. You can set how long the printer waits before going to power save mode.
Auto Continue
Values: Off, On
This item determines whether or not the printer continues printing when it detects the paper is mismatched with your paper setting.
•Off: If a paper mismatch occurs, the message will remain on the display and the printer will remain
•On: If a paper mismatch occurs, an error message will display. The printer will go offline for 30 seconds, then automatically clear the message and continue printing.
Altitude Adj.
Values: Plain, High1, High2, High3
You can optimize print quality according to your altitude.
Auto CR | Values: LF, LF+CR |
|
This item allows you to append the required carriage return to each line feed.
Refer to the following samples:
AA |
| AA |
BB |
| BB |
CC |
| CC |
LF |
| LF+CR |
2.4 <System setup>