
2 Using SetIP
•Installing SetIP
•Using SetIP
Installing SetIP
1 Make sure that the printer is connected to your computer and powered on.
2Insert the supplied
The
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
3Click Install SetIP Utility(Optional).
4Click Next.
11 Using SetIP
5Click Next.
6Click Finish.
Using SetIP
1From the Windows Start menu, select Programs or All
Programs Æ your printer driver name Æ SetIP Æ SetIP.
The program automatically detects and displays new and configured print servers on your network.
2 Select the name of your printer and click | . If you |
cannot find your printer name, click | to refresh |
the list. |
|
NOTES:
•To confirm the MAC address, see the NETWORK PRINTER CARD TEST PAGE. The NETWORK PRINTER CARD TEST PAGE will be printed after the Configuration Page.
•The refreshed list doesn’t show your printer, click enter your network printer card’s IP address, subnet mask, default gateway, and then click Apply.
3Click OK to confirm the settings.
4Click Exit to close the SetIP program.