Installation
Pre-Installation
The instructions that follow are applicable to the typical installation. For special applications, consult a qualified electrician or your Xantrex Certified Dealer. Installation procedures will vary according to your specific application.
Important: Installations should meet all local codes and standards. Installations of this equipment should only be performed by skilled personnel such as qualified electricians and Certified Renewable Energy (RE) System Installers. For a list of Xantrex Certified RE dealers, please visit our website at www.XantrexREdealers.com.
Removing the Top Cover
Access the inside of the controller by removing the four phillips screws
Remove these phillips screws (x4) from the front cover to access the inside of the controller.
Figure 2-1 Removing the Front Cover
Removing Knockouts
Six
14 |