Equalization Charging
Manual Equalization
Manual equalization of the battery can be enabled by pressing the Reset Switch on the right side of the
Front Panel LED (flashes red/green
during equalization)
Reset
Switch
Access
Figure 2-17 Front Panel LED and Reset Switch Location
The equalization process will continue until the batteries have been held at or above the bulk setting for two hours of accumulated time. Once the battery voltage has been at or above the bulk setting for a cumulative period of two hours, the
During the equalization process, the status LED will alternate between red and green and will not provide any other mode/status indication. Large battery banks may need several equalization cycles to fully stir the electrolyte and charge the cells. These cycles should follow one another until the battery voltage reaches the upper limit for the full two hours.
31 |