Installation
Mounting the Controller
The
In outdoor installations, the
CAUTION: Damage to
Install the
To mount the C-Series controller:
1.Remove the faceplate on the controller.
2.Place the controller on the desired mounting surface and mark the location of the keyhole slots on the wall.
3.Move the controller out of the way, and secure two mounting screws in the locations marked. Leave the screw heads backed out approximately ¼ inch (6 mm) or less.
4.Place the controller onto the screws and pull it down into the keyhole slots.
5.Then insert the two more screws in two of the four additional mounting holes provided to secure the enclosure onto the wall.
6.Provide either
16 |