Cabletron Systems 9C300-1 manual Power Screen, System Banner Screen

Page 23

Non-Interactive Mode

The Power Screen

The Power Screen, as shown in Figure 3-10,is the fourth screen of the non-interactive mode.

Line 1 displays the screen heading.

Line 2 displays the percentage of power being used.

Line 3 displays the availability of power redundancy.

Line 4 displays the system status.

CHASSIS POWER

POWER LOAD_ _ _ _ _ _ _ _ _ _ 100%

POWER REDUNDANCY AVAILABLE

SYSTEM STATUS NORMAL

Figure 3-10. The Power Screen

The System Banner Screen

The System Banner Screen, as shown in Figure 3-11,is the ﬁfth screen of the non-interactive mode. The information that displays is the default information built into the system.

Lines 1 and 2 display the Cabletron name and the system name.

Line 3 displays the system uptime.

Line 4 displays the system status.

CABLETRON SYSTEMS INC.

MMAC-PLUS

SYSTEM UPTIME hh:mm:ss

SYSTEM STATUS NORMAL

Figure 3-11. The System Banner Screen

3-11

Image 23

Contents MMAC-Plus 9C300-1 Environmental Module User’s Guide Page Page DOC Notice FCC NoticeContents Appendix a Epim Speciﬁcations Appendix B Uninterruptible Power Supply UPSChapter Speciﬁcations 9C300-1 Environmental Module Using This ManualOut-of-Band Management FeaturesSystem Cooling Hot Swapping Environmental/Power MonitoringRelated Manuals Flash EepromGetting Help Installing the 9C300-1 Environmental Module Installing the 9C300-1 Environmental ModuleInstalling the 9C300-1 Environmental Module Monitoring Functions 9C300-1 Environmental Module OperationTemperature Range LCD Display External Ambient Temperature9C300-1 Environmental Module and Fan Tray Fan SpeedHumidity LCD Display Internal Operating TemperatureSystem Humidity System VoltagesLED Color State Description Lanview LEDsOut-of-Band Management Pin Description COM1 and COM2 PortsLCD and Keypad Ethernet Port Interface Module EpimSystem Screen Non-Interactive ModeNon-Interactive Mode Screens Environment Screen Utilization ScreenSystem Banner Screen Power ScreenInteractive Mode Screens Interactive ModeMain Screen Alarm ScreenENV Power Supply Speciﬁc Screen Supplies Installed 2 PWR Redundancy Status 1 on 2 on ExitCommunications Screen Diagnostic Results Screen Diagnostic Module Selection ScreenModule Selection Screen BBU ScreenModule Speciﬁc Screen FaultModule Memory Screen Module Environment ScreenEnvironmental Module Speciﬁc Screen Module Backplane ScreenEnvironmental Module Environment Screen LCD Contrast Adjustment Screen 9C300-1 Environmental Module Operation Service SafetyEnvironmental DimensionsWeight PhysicalIntroduction Epim SpeciﬁcationsParameter Typical Value Worst Worst Case Budget EPIM-F1 and EPIM-F2EPIM-F1 and EPIM-F2 EPIM-F3 Parameter Typical Minimum Maximum Grounding Connector TypePin Number Represents EPIM-A and EPIM-X AUI PortEpim Speciﬁcations Connecting a UPS to an EM Uninterruptible Power Supply UPSConﬁguring COM Port for UPS Uninterruptible Power Supply UPSMonitoring UPS Verifying ConﬁgurationUninterruptible Power Supply UPS