Cabletron Systems 9C300-1 manual Lanview LEDs, LED Color State Description

Monitoring Functions

LANVIEW LEDs

The LANVIEW LEDs on the front of the 9C300-1 Environmental Module may be used as an aid in troubleshooting.

There are two LEDs visible to the user (Figure 3-4): the STATUS LED and the

ALARM LED.

STATUS LED

	MMAC						EPIM
							STATUS
					9C300-1		ALARM	COM 1	COM 2
													ENT ER
1	2	3	4	5	6	7	8	9	10	11	12	13	14

ALARM LED

Figure 3-4. 9C300-1 Environmental Module LANVIEW LEDs

The STATUS LED indicates the current status of the Environmental Module processor and peripherals. The possible states and descriptions of the STATUS LED are listed in Table 3-4.

Table 3-4. STATUS LED

LED Color	State	Description
Green	Functional	Fully operational.
Yellow/Green	Booting	Flashes green and yellow while booting.
Yellow	Testing	Testing system.
Yellow (Flashing)	Crippled	Not fully operational.
Red	Reset	Normal power-up reset.
Red (Flashing)	Failed	Fatal error has occurred.
Off	Power off	Lack of 5 volt input to the Environmental
		Module.

3-5