Cabletron Systems 9C300-1 manual Main Screen, Alarm Screen

Page 25

Interactive Mode

The Main Screen

The Main Screen, as shown in Figure 3-13,is the initial screen of the Interactive Mode. It allows access to all of the Interactive Mode screens. Interactive Mode screens are distinguished by the display of option ﬁelds. Option ﬁelds are designated with brackets (< >). To select an option, highlight the option ﬁeld by using the arrow function keys to place the cursor on the option; then press the ENTER key.

Lines 1 and 2 display the screen heading.

Line 3 displays the <ALARMS> option ﬁeld. Access information about any current alarms by selecting this item.

Line 4 displays the <SYSTEM>, <MODULES> and <SCREEN CONTRAST> options. Select the appropriate option to access information on the desired category.

CABLETRON SYSTEMS INC

MMAC-PLUS <ALARMS>

<SYSTEM> <MODULES> <SCREEN CONTRAST>

Figure 3-13. The Main Screen

The Alarm Screen

Select the <ALARMS> option ﬁeld in line 3 of the Main Screen, as shown in Figure 3-13,to access the alarm message queue. Unread alarms are present in the message queue when the ALARM LED is red.

Line 1 of the Alarm Screen, as shown in Figure 3-14,displays the current alarm in the queue as well as the date and time the alarm occurred.

Lines 2 and 3 show the description of the current alarm including the module and parameter(s) causing the alarm.

If other alarms are in the queue (indicated by x > 1 on line 1), select <MORE> to see the information screens for them.

ALARM y of x 11/05/94, 11:23

Alarm Description Field

Alarm Description Field <MORE> <ACKNOWLEDGE> <EXIT>

Figure 3-14. The Alarm Screen

3-13

Image 25

Contents MMAC-Plus 9C300-1 Environmental Module User’s Guide Page Page DOC Notice FCC NoticeContents Chapter Speciﬁcations Appendix B Uninterruptible Power Supply UPSAppendix a Epim Speciﬁcations 9C300-1 Environmental Module Using This ManualSystem Cooling FeaturesOut-of-Band Management Related Manuals Environmental/Power MonitoringFlash Eeprom Hot SwappingGetting Help Installing the 9C300-1 Environmental Module Installing the 9C300-1 Environmental ModuleInstalling the 9C300-1 Environmental Module Monitoring Functions 9C300-1 Environmental Module OperationTemperature Range LCD Display External Ambient Temperature9C300-1 Environmental Module and Fan Tray Fan SpeedSystem Humidity Internal Operating TemperatureSystem Voltages Humidity LCD DisplayLED Color State Description Lanview LEDsOut-of-Band Management Pin Description COM1 and COM2 PortsLCD and Keypad Ethernet Port Interface Module EpimNon-Interactive Mode Screens Non-Interactive ModeSystem Screen Environment Screen Utilization ScreenSystem Banner Screen Power ScreenInteractive Mode Screens Interactive ModeMain Screen Alarm ScreenENV Power Supply Speciﬁc Screen Supplies Installed 2 PWR Redundancy Status 1 on 2 on ExitCommunications Screen Diagnostic Results Screen Diagnostic Module Selection ScreenModule Selection Screen BBU ScreenModule Speciﬁc Screen FaultModule Memory Screen Module Environment ScreenEnvironmental Module Speciﬁc Screen Module Backplane ScreenEnvironmental Module Environment Screen LCD Contrast Adjustment Screen 9C300-1 Environmental Module Operation Service SafetyWeight DimensionsPhysical EnvironmentalIntroduction Epim SpeciﬁcationsParameter Typical Value Worst Worst Case Budget EPIM-F1 and EPIM-F2EPIM-F1 and EPIM-F2 EPIM-F3 Parameter Typical Minimum Maximum Grounding Connector TypePin Number Represents EPIM-A and EPIM-X AUI PortEpim Speciﬁcations Connecting a UPS to an EM Uninterruptible Power Supply UPSConﬁguring COM Port for UPS Uninterruptible Power Supply UPSMonitoring UPS Verifying ConﬁgurationUninterruptible Power Supply UPS