Extron electronic DVS 304 manual Pin, Video

Page 11

DVideo input 1: Composite video — Connect a composite video signal to

this female, BNC connector.

1

EOptional SDI (serial digital interface) input connector — Connect an

SDI signal to this female BNC connector. During setup, the SDI input can be assigned to one of the other unused inputs.

FVideo input 2: Composite/S-video/Component — Connect composite video, S-video, and component video signals. Connect cables for the appropriate signal type, as shown here.

Composite Video				S-video (YC)		Component Video (Y, R-Y, B-Y)
	Y	B-Y		Y	B-Y		Y	B-Y
	/VID	/C		/VID	/C		/VID	/C
2	R-Y		2	R-Y		2	R-Y
2			2			2

VID

SDI

Figure 3. Input 2 Connector Cabling

	G Video input 3: S-video — Connect an S-video signal to this 4-pin, mini-DIN	3	YC
	female connector.

HVideo input 4: RGB/R-Y, Y, B-Y/YC/VID — Connect RGBHV, RGBS, RGsB, RGBcvS, YUVi, YUVp/HDTV, S-video and composite video through this 15-pin HD connector. See pin configurations below.

NOTE: DVS 304 DVI models feature EDID emulation on this 15-pin HD connector.

Signal		Input 4 Configuration				3 2
	Pin 1	Pin 2	Pin 3	Pin 13	Pin 14	1
RGBHV	R	G	B	H	V
RGBS	R	G	B	S	14	13
RGBS	R	G	B	S
RGBcvS	R	G	B	S
RGsB	R	Gs	B
YUV	R-Y	Y	B-Y
S-video		Y	C
Video		Vid

Figure 4. Input 4 Pinout Table

NOTE: Equipment following the SCART interconnection standard may be connected to the RGBcvS input cabling configuration.

DVS 304 Series • Cabling

6

Image 11

Contents DVS 304 Series Vorsicht AchtungPrecaucion AvertissementExtron Electronics. All rights reserved FCC Class a NoticeContents Menu System DVS 304 Models IntroductionDVS 304 Series Description Four inputs FeaturesMemory and input presets DVS 304 DVI ModelsBuffered video outputs Controlling the DVS 304 DevicesOptions and Accessories Rear Panel Cabling CablingVideo PinWiring the RJ-45 No connection Ground Signal ground InputPin RS-232 Function Description InputFront Panel Overview OperationBetween them Menus, Configuration, and AdjustmentsMenu Navigation Using Front Panel Controls Menu OverviewMain Menu Start Auto Image Input ConfigurationInput 4 video type Input 1 video typeInput 2 video type Input 3 video typePicture Control Output ConfigurationSync Polarity Resolutions and Refresh RatesOutput Format Memory Preset Per input Total Audio Configuration Audio Models OnlyMemory Preset Input preset Save Memory PresetClear CLR memory preset Recalling a presetAdvanced Configuration IP ConfigurationAuto-Image Blue modeAuto switch mode RGB delayRefresh Lock Enhance modeOSD label Test patternAuto Memory Per input Total Aspect ModeAuto Memory and Auto Image Features Auto MemoryChanging the input Picture-in-picture modeExit Menu Resetting an InputUsing the swap feature Mode Activation Result Purpose and Notes Resetting the UnitDVS 304 Reset Mode Summary Front Panel Lockout Executive Modes System ResetDVS 304 Devices Connected to a Matrix Switcher Setting up the DVS to Work with a Matrix SwitcherFrom the Tools menu, select Sync Scaler to Matrix Switcher Removing the Sync to Matrix Script Sync DVS 304 to Matrix Switcher window opensDVS 304 Series Operation Pin RS-232 Function Description SIS Communication ControlError Numbers Password InformationError Responses Error Response ReferencesTelnet Web Browser Command and ResponsesUsing the Command and Response Tables Symbol Definitions Password is also removed X7@ = Input selection 2 or SIS Command Edid Table see SIS Command and Response Table EI*X10*EDIDX6 Input aspect ratioVideo mute Edid emulation for input 4 DVI models onlyBrightness Color available for PAL and Ntsc onlyTint available for Ntsc composite and S-video only ContrastOutput sync format Zoom modePan Output scaler rateAudio mute audio models only Memory presets inputs 1 toInput presets input 4 only Write and read input preset name inputs 4 presets onlyTest pattern Volume control audio models onlyRGB delay time Auto switch modeView internal temperature PIP modeSwap when PIP mode is On PIP mode audio follow audio model onlySDI field flip Front panel security lockout Executive ModeEnhanced mode Aspect modeFirmware version requests SIS Command and Response Table for IP Control PortEthernet data port E0 *X6 TCEAE Information requestsEvent control X4&SM Web browser specific commandIP setup commands MailECZ E #CZECG WX1CSECS E EMH WX3#CURe-map port designations EMTListing connections EMDFile commands Directory commandsEZI File erase commandsReset ZAP/erase Commands EZAInstallation from the DVD Signal Processing Products Control ProgramInstalling the Software Starting the Sppcp Installation from the Web SiteOrientation Using the SppcpOptions menu Sppcp MenusFile menu Tools menu Sync to Matrix Switcher WindowSystems Settings Window Firmware Loader Window Process Running Help menuControl Tab Window Control TabI/O Configuration Tab Window Configuration TabStatus Bar Advanced Settings TabEthernet Control Accessing the Default Web PagesStatus tab displays the System Status page for the DVS Navigating the Default Web PagesStatus System StatusSystem Settings ConfigurationIP Address Scaler Settings Scaler SettingsPasswords PasswordsFirmware Upgrade Firmware UpgradeWeb Server File Management File ManagementUser Control ControlPresets PresetsMain Menu Default Cycle MenuMenu System Start Auto Image Menu Input Configuration MenuMemory Preset Menu Output Configuration MenuAudio Configuration Menu Advanced Configuration Menu IP Configuration MenuEnable Executive Mode Executive Mode MenuVideo Processing SpecificationsReference Material Video InputControl/Remote Decoder/Scaler SyncAudio DVS 304 A, DVS 304 AD, DVS 304 DVI A, DVS 304 DVI AD General Description Part Number Models Part Numbers and AccessoriesIncluded Parts Optional PartsInstallation of the SDI card Serial Digital Interface SDI Card InstallationDVS 304 Series Reference Information DVS 304 Series Reference Information Europe USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Asia Middle East

Related manuals

Manual 96 pages 15.78 Kb