Extron electronic DVS 304 manual Resolutions and Refresh Rates, Output Format, Sync Polarity

Resolutions and Refresh Rates

Rotate the Adjust horizontal ([) knob while in this submenu to select one of the available combinations of output resolutions and refresh (vertical scanning) rates.

Rotate the Adjust vertical ({) knob while in this submenu to select one of the available refresh rates. The default resolution and rate for the DVS 304 series is 1024x768 @ 60Hz.

Resolution		24 Hz	50 Hz	59 Hz	60 Hz	72 Hz	75 Hz	96 Hz	100 Hz	120 Hz
640 x	480		X		X	X		X	X	X
800 x	600		X		X	X		X	X	X
852 x	480		X		X
1024 x 768			X		X	X		X
1024 x 852			X		X	X		X
1024 x	1024		X		X	X
1280 x 768			X		X	X		X
1280 x	1024		X		X	X
1360 x 765			X		X	X
1365 x 768			X		X	X
1365 x	1024		X		X
1366 x 768			X		X	X
1400 x1050			X		X
1600 x	1200		X		X
480p				X	X
576p			X						X
720p			X	X	X
1080i			X	X	X
1080p		X	X	X	X
1440 x 900					X		X
1680 x	1050				X
1280 x 800			X		X
1080p Sharp					X
1920x1200*					X
1080p CVT					X

* DVI models only

Output Format

Using either the Adjust horizontal ([) or Adjust vertical ({) knob, select the output video format required by the display: RGBHV (default); RGBS; RGsB; Y, R-Y, B-Y.

Sync Polarity

The display device may require a particular combination of horizontal (H) and vertical (V) sync signal polarities. Select the appropriate combination of positive or negative H and V sync by rotating either the Adjust horizontal ([) or Adjust vertical ({) knob.

NOTE: If the output format was specified as RGsB or Y, R-Y, B-Y; or RGBS, this submenu will not be displayed because this menu is only applicable for RGBHV.

DVS 304 Series • Operation 15