Extron electronic DVS 304 manual Systems Settings Window

If the sync to matrix script needs to be removed or updated, click Remove Sync Scripts.

•System Settings... — Select this to open a secondary window. This allows changes to be made to various device settings: IP and RS-232 connections, date/time, and passwords. Select the applicable tab, change the settings as desired, and click Submit to make the changes effective.

NOTE: Changing the IP settings may result in loss of connection to the LAN

Figure 32. Systems Settings Window

Only the baud rate can be changed when selecting the RS-232 tab.

Click Cancel or the X in the window’s top right corner to exit without changes.

•Reset — If it is necessary to reset the DVS 304, select this to open a secondary drop-down box. Three options are available: Reset Audio Input

Levels Reset Picture, Image, Position and Size Controls and Reset to Factory Defaults. Reset Audio Input Levels resets the audio input levels to the default settings.

Reset Picture, Image, Position, and Size Controls resets all picture controls to their default settings.

Reset to Factory Defaults resets all settings on the device to their factory defaults, including all video and audio settings, and clears all configuration files from the device.

Select any reset option as desired.

•Update Firmware... — Selecting this opens the Firmware Loader application (where already installed on a connected PC). The Firmware Loader only uploads new firmware to the device through a TCP/IP connection.

In order for the Update Firmware function to work, the Firmware Loader application must be installed on the connected PC. If already installed, skip steps 1 through 4.

DVS 304 Series • SPPCP 59