Extron electronic DVS 304 SIS Command and Response Table for IP Control Port, Ethernet data port

DVS

SIS Command and Response Table for IP Control Port

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to processor)	(host to processor)	(processor to host)

Ethernet data port

Set current connection	E0 *X6( TC}	W 0 %2A X6( TC	Pti 0 * X6( ]
port timeout
View current connection	E0TC }	W 0TC	X6( ]
port timeout
Set global IP port timeout	E1 * X6( TC }	W 1%2AX6(TC	Pti1 * X6( ]
View global IP port	E1TC }	W 1TC	X6( ]
timeout
Firmware version requests

NOTE: An asterisk (*) after the version number indicates the version currently running. Caret (^) indicates bad checksum/invalid load. Question marks (?) indicate version not

loaded.

Query firmware version Q or 1Q Q or 1Q X1! ] Show the processor’s firmware version

number (X1!) to two decimal places. Gives the number of the currently running version of the user-updatable firmware.

304 Series • SIS Communication and Control

Query verbose version	0Q	0Q	All responses
information			from 2Q-3Q-4Q ]
Example:	1Q	1Q	1.01
Query bootstrap version	2Q	2Q	X1! ]
Example:	2Q	2Q	0.06
Query factory firmware	3Q	3Q	X1!(plus web ver.-
version			desc-date/time)]
Example:	3Q	3Q	1.00(1.37-DVS 304
			Series -Fri, 12 Aug
			2005 03:28:10 GMT)

Show bootstrap, factory-installed, and updated firmware versions. (See 2Q, 3Q, and 4Q, below.)

The bootstrap firmware is not user- replaceable but you may need this information for troubleshooting.

Factory-installed firmware is not user replaceable. This firmware is the version the processor reverts to after a mode 1 reset (see “Operation” section).

In this example, the factory firmware version is 1.00, (the kernel version 1.37), for the DVS 304, dated 12 August, 2005.

NOTE: X1!	= Version number (listed to 2 decimal places)
X6(	= The number of seconds before timeout on the IP connection: (min = 1; max = 65000; default = 30 = 300 seconds)

45