Extron electronic DVS 304 manual X7@ = Input selection 2 or

Page 40

X7@ = Input selection: 2 or 4

X7# = Input video format: 1 = composite, 2 = S-video, 3 = RGBcvS, 4 = YUVi, 5 = YUVp/HDTV, 6 = RGB scaled, 7 = RGB pass through, 8 = auto detect/YUV auto, 9 = SDI

NOTE: RGB pass-through is only on analog output for DVI models. The DVI output is disabled for RGB pass-through.

X7$ = H start: 0 to 127 for video inputs; 0 to 255 for RGB and YUVp/HDTV inputs.

X7% = V start: 0 to 93 for video inputs; 0 to 255 for RGB and YUVp/HDTV inputs.

X7^ = Pixel phase: 1 to 31

X7& = Total pixels (+/- 512 of the default value for RGB, fixed for video)

X7* = Active pixels (+/- 512 of the default value for RGB, +/- 100 for video)

X7( = Active lines (+/- 256 of the default value for RGB, +/- 127 for video)

X8) = 0 = 4:3, or 1 = 16:9

X8! = Input standard: 0 = none, 1 = NTSC 3.58, 2 = PAL, 3 = NTSC 4.43, 4 = SECAM, - = RGB or YUVp/HDTV

X8@ = internal temperature (in degrees Celsius)

X8$ = Text label/preset name: up to 16 characters

X8% = Picture adjustment: 0 to 127

X8^ = H and V position (values depend on current output rate)

X8& = H and V size (values depend on current output rate)

X8* = Zoom (100 to 200%)

X8( = Pan (values depend on current output rate and zoom %)

X9) = Test pattern: 0 to 2

X9! = Output resolution:

 

 

 

 

 

1

= 640x480

10

= 1365x768

18

= 1080i

 

2

= 800x600

11

= 1365x1024

19

= 1080p

 

3

= 852x480

12

= 1366x768

20

= 1440x900

 

4

= 1024x768

13

= 1400x1050

21

= 1680x1050

 

5

= 1024x852

14

= 1600x1200

22

= 1280x800

 

6

= 1024x1024

15

= 480p

23

= 1080p Sharp

 

7

= 1280x768

16

= 576p

24

= 1920x1200

 

8

= 1280x1024

17

= 720p

25

=1080p CVT

 

9

= 1360x765

 

 

 

 

 

X9@ = Output refresh rate:

 

 

 

 

 

1

= 50 Hz

 

 

4 = 96 Hz

6 = 120 Hz

2

= 60 Hz

 

 

5 = 100 Hz

7 = 59.94 Hz

3

= 72 Hz (75 Hz for 1440x900, 24 Hz for 1080p)

 

 

 

X9# = Output polarity: 0 = H - / V -, 1 = H - / V +, 2 = H + / V -, 3 = H+/ V +

X9$ = Output sync format: 0 = RGBHV (default), 1 = RGBS, 2 = RGsB, 3 = Y, R-Y, B-Y

X9% = Memory presets: 1 to 3

X9^ = Input 4 presets: 1 to 128

X9& = Test pattern: 0 to 3

X9* = OSD display setup: 0 to 5 seconds in 1 second steps.

X9( = Auto image: 0 to 2

DVS 304 Series • SIS Communication and Control

35

Page 39 Page 41
Image 40
Page 39 Page 41
Contents DVS 304 Series Achtung PrecaucionAvertissement VorsichtFCC Class a Notice Extron Electronics. All rights reservedContents Menu System DVS 304 Series Description IntroductionDVS 304 Models Features Memory and input presetsDVS 304 DVI Models Four inputsControlling the DVS 304 Devices Buffered video outputsOptions and Accessories Cabling Rear Panel CablingPin VideoWiring the RJ-45 Ground Signal ground Input Pin RS-232 Function DescriptionInput No connectionOperation Front Panel OverviewMenus, Configuration, and Adjustments Menu Navigation Using Front Panel ControlsMenu Overview Between themMain Menu Input Configuration Start Auto ImageInput 1 video type Input 2 video typeInput 3 video type Input 4 video typeOutput Configuration Picture ControlOutput Format Resolutions and Refresh RatesSync Polarity Memory Preset Audio Configuration Audio Models OnlyMemory Preset Per input Total Save Memory Preset Clear CLR memory presetRecalling a preset Input presetIP Configuration Advanced ConfigurationBlue mode Auto switch modeRGB delay Auto-ImageEnhance mode OSD labelTest pattern Refresh LockAspect Mode Auto Memory and Auto Image FeaturesAuto Memory Auto Memory Per input TotalPicture-in-picture mode Changing the inputUsing the swap feature Resetting an InputExit Menu DVS 304 Reset Mode Summary Resetting the UnitMode Activation Result Purpose and Notes System Reset Front Panel Lockout Executive ModesSetting up the DVS to Work with a Matrix Switcher DVS 304 Devices Connected to a Matrix SwitcherFrom the Tools menu, select Sync Scaler to Matrix Switcher Sync DVS 304 to Matrix Switcher window opens Removing the Sync to Matrix ScriptDVS 304 Series Operation SIS Communication Control Pin RS-232 Function DescriptionPassword Information Error ResponsesError Response References Error NumbersUsing the Command and Response Tables Command and ResponsesTelnet Web Browser Symbol Definitions Password is also removed X7@ = Input selection 2 or SIS Command Edid Table see SIS Command and Response Table Input aspect ratio Video muteEdid emulation for input 4 DVI models only EI*X10*EDIDX6Color available for PAL and Ntsc only Tint available for Ntsc composite and S-video onlyContrast BrightnessZoom mode PanOutput scaler rate Output sync formatMemory presets inputs 1 to Input presets input 4 onlyWrite and read input preset name inputs 4 presets only Audio mute audio models onlyVolume control audio models only RGB delay timeAuto switch mode Test patternPIP mode Swap when PIP mode is OnPIP mode audio follow audio model only View internal temperatureFront panel security lockout Executive Mode Enhanced modeAspect mode SDI field flipSIS Command and Response Table for IP Control Port Ethernet data portE0 *X6 TC Firmware version requestsEvent control Information requestsEAE Web browser specific command IP setup commandsMail X4&SM#CZ ECZ EECS E WX1CSECG WX3#CU Re-map port designationsEMT EMHEMD Listing connectionsDirectory commands File commandsFile erase commands Reset ZAP/erase CommandsEZA EZIInstalling the Software Signal Processing Products Control ProgramInstallation from the DVD Installation from the Web Site Starting the SppcpUsing the Sppcp OrientationFile menu Sppcp MenusOptions menu Sync to Matrix Switcher Window Tools menuSystems Settings Window Firmware Loader Window Help menu Process RunningControl Tab Control Tab WindowConfiguration Tab I/O Configuration Tab WindowAdvanced Settings Tab Status BarAccessing the Default Web Pages Ethernet ControlNavigating the Default Web Pages StatusSystem Status Status tab displays the System Status page for the DVSConfiguration System SettingsIP Address Scaler Settings Scaler SettingsPasswords PasswordsFirmware Upgrade Firmware UpgradeFile Management Web Server File ManagementControl User ControlPresets PresetsMenu System Default Cycle MenuMain Menu Input Configuration Menu Start Auto Image MenuAudio Configuration Menu Output Configuration MenuMemory Preset Menu IP Configuration Menu Advanced Configuration MenuExecutive Mode Menu Enable Executive ModeSpecifications Reference MaterialVideo Input Video ProcessingAudio DVS 304 A, DVS 304 AD, DVS 304 DVI A, DVS 304 DVI AD SyncControl/Remote Decoder/Scaler General Part Numbers and Accessories Included PartsOptional Parts Description Part Number ModelsSerial Digital Interface SDI Card Installation Installation of the SDI cardDVS 304 Series Reference Information DVS 304 Series Reference Information USA, Canada, South America Japan Central America Europe, Africa, and the Middle China EastAsia Middle East Europe
Related manuals
Manual 96 pages 15.78 Kb
Top Page Image Contents