Extron electronic DVS 304 manual Setting up the DVS to Work with a Matrix Switcher

Setting up the DVS to Work with a Matrix Switcher

The Sync to Matrix tool is a powerful tool that can simplify the control system necessary when using an Extron matrix switcher and a DVS 304.

The Sync to Matrix script can sense when a new tie is made on the matrix is routed to the DVS and automatically recalls the input preset associated with the input on the matrix switcher. The input preset recalls all the settings for the input including the signal format, input sampling settings, and picture controls.

Extron

CrossPoint 300 84 HV

Matrix Switcher

		Extron
		DVS 304
		Digital Video Scaler
		Extron
		DVS 304
DVD/VCR		Digital Video Scaler
		Display
AV Tuner	Camera	Display

HD Tuner

Extron

RGB 109xi

Interface

Document

Camera

PC

Figure 26. DVS 304 Devices Connected to a Matrix Switcher

To configure the input presets required using the Sync to Matrix tool, do the following:

1.Install and connect the DVS as described in the Setup Guide, with the exception of step 3. In place of this step, connect the DVS 304’s input #4 to one of the matrix switcher’s outputs.

NOTE: Multiple DVS 304s can be connected to a single matrix switcher.

2.On the matrix switcher, tie input 1 to the output connected to input 4 on the DVS

(see the figure below). Refer to the matrix switchers user manual for method.

Input 1

Input 2

Input 3

Input 4

Input 5

Input 6

Matrix Switcher

Output 1	Input 4
Output 2	Input 4
Output 3
Output 4
Output 5
Output 6	Input 4

DVS 304	#1
DVS 304	#2
(optional)

DVS 304 #6

(optional)

Output to display

Output to display

Output to display

Output 3

Input 64

Output 4

Figure 27. Multiple DVS 304s Connected to a Matrix Switcher

DVS 304 Series • Operation 26