Extron electronic DVS 304 Menus, Configuration, and Adjustments, Menu Overview, Between them

Menus, Configuration, and Adjustments

Scaler configuration and adjustments can be performed by using the embedded Web pages and the Windows-based control program (see the “SIS Communication and Control” chapter for details) or by using the front panel controls and the menus displayed on the DVS unit’s LCD screen. These menus are used primarily when the scaler is first set up.

Menu Navigation Using Front Panel Controls

Menu button — Press the Menu button to activate menus and scroll through the eight main menus.

Next button — Press the Next button to move between the submenus of a selected main menu. Pressing the Next button during input configuration causes the current input’s number and format type to be displayed on the LCD.

Adjust ([,{) knobs — In configuration mode, rotate the Adjust horizontal ([) knob and Adjust vertical ({) knob to scroll through submenu options and to make adjustment selections. Refer to the flowcharts in this chapter and to specific sections for explanations on knob adjustments.

Power

on

Menu Overview

The “default cycle” appears on the LCD when no adjustments are actively being made. The screens cycle between the screen that shows the active input’s number and video format and the current output resolution, as shown below

							Default Cycle
								2 sec.
EXTRON		DVS 304		60-xxxx-xx		INPUT 1		OUTPUT
ELECTRONICS	2 sec.	xxx xx	2 sec.	FW ver. 1.xx	2 sec.	COMPOSITE	2 sec.	1024 x 768@60
		Displays specific model name		Displays specific model part
		(for example DVS 304 DVI AD)		number (for example 60-1027-04)
		Figure 9. Default Menus
	NOTE: From any menu or submenu, after 20 seconds of inactivity the DVS will save all
		adjustment settings and time-out to the default cycle.
	The main menus are shown on the following pages. Use the Menu button to scroll
	between them.
	NOTE: If no signal is present on the currently selected input, NO SIGNAL appears in
		place of the input type, for example, INPUT 4 NO SIGNAL.

DVS 304 Series • Operation 10