
SPPCP Menus
File menu
Click on this to open a
•Connect — Select this to reconnect the DVS (or connect a new device) when it has been disconnected from the Signal
Processing Products Control Program. Follow the steps in the section “Starting the SPPCP”.
•Disconnect — Select this to disconnect the unit from the Signal Processing Products Control Program. The SPPCP remains open, but items on the main window are inactive (grayed out) and configuration via the SPPCP is not available.
•Save Configuration... — Select this to save the current DVS configuration to the PC.
A secondary window opens allowing choice of items to save, and selecting a folder location for the saved xxx.cfg files.
•Restore Configuration... — Select this to restore a saved DVS configuration from a
PC. A secondary window opens allowing a choice of which folder to restore the files from. A
•File Manager — Select this to load the Extron IP Link® File Manager application. This is used in uploading and downloading files to and from IP
NOTE: This option becomes enabled when the File menu is accessed after installing
File Manager. In order to use this option, download the IP Link File Manager application at www.extron.com.
•Exit — Select this to exit the control program. This disconnects and closes the SPPCP.
Options menu
Click on this to open a
Show Splash Screen, and Display Errors on Status Bar.
•Show Splash Screen — Select this to show the Extron Signal Processing Products
Control Program splash screen upon startup. Deselected, the program opens immediately at the Select Connection Type window.
•Display Errors on Status Bar — Select this to display any operation errors on the status bar at the bottom of the window.
DVS 304 Series • SIS Communication and Control | 57 |