2.8Modbus/Jbus for INMC 66123
The Modbus/Jbus hexadecimal (MODBUS RTU) communication protocol is used in slave mode. The system provides a communication channel with an RS485 or RS232 interface.
Note:
2 wires or 4 wires RS485 link are available.
Warning:
RS232 and RS485 communication ports cannot be used together.
JBUS/MODBUS communication is operational 2 minutes after the startup of the card.
The Modbus Register map is presented in chapter 7.4.
2.9Teleservice for NMTC 66124
The Teleservice card allow the UPS Remote Monitoring feature from the APC by Schneider TLS Center.
This feature manages remotely UPS alarms, UPS diagnsoitc, UPS Monitroing and Montly Reporting.
See chapter 8.
Network Management Card & Modbus/Jbus | 34022321XT indice :AE | Page 11/98 |
Network Management Teleservice Card |
|
|
APC by Schneider Electric
www.apc.com