Delta Electronics VFD-XXXE quick start Not for VFD*E*C, Group 4 Input Function Parameters

		Pr.	Explanation	Settings	Factory	NOTE
					Setting
	03.05		Terminal Count	0 to 9999	0
			Value
03.06			Preliminary Count	0 to 9999	0
			Value
03.07			EF Active When	0: Terminal count value attained, no EF	0
			Terminal Count	display
			Value Attained	1: Terminal count value attained, EF active
				0: Fan always ON
				1: 1 minute after AC motor drive stops, fan
				will be OFF
03.08			Fan Control	2: Fan ON when AC motor drive runs, fan	0
				OFF when AC motor drive stops
				3: Fan ON when preliminary heatsink
				temperature attained
				Read only
				Bit0=1:RLY used by PLC
			The Digital Output	Bit1=1:MO1 used by PLC
				Bit2=1:MO2/RA2 used by PLC
			Used by PLC
03.09				Bit3=1:MO3/RA3 used by PLC	##
			(NOT for VFD*E*C
				Bit4=1:MO4/RA4 used by PLC
			models)
				Bit5=1:MO5/RA5 used by PLC
				Bit6=1:MO6/RA6 used by PLC
				Bit7=1:MO7/RA7 used by PLC
			The Analog Output	Read only
03.10			Used by PLC	Bit0=1:AFM used by PLC	##
			(NOT for VFD*E*C	Bit1=1: AO1 used by PLC
			models)	Bit2=1: AO2 used by PLC
03.11			Brake Release	0.00 to 20.00Hz	0.00
			Frequency
03.12			Brake Engage	0.00 to 20.00Hz	0.00
			Frequency
				Read only
				Bit0: RLY Status
				Bit1: MO1 Status
			Display the Status of	Bit2: MO2/RA2 Status
03.13			Multi-function	Bit3: MO3/RA3 Status	##
			Output Terminals	Bit4: MO4/RA4 Status
				Bit5: MO5/RA5 Status
				Bit6: MO6/RA6 Status
				Bit7: MO7/RA7 Status
	03.14		Desired Frequency	0.00 to 600.0Hz	0.00
			2 Attained
			Group 4 Input Function Parameters
04.00			Keypad	0.0 to 100.0 %	0.0
			Potentiometer Bias
04.01			Keypad	0: Positive bias	00
			Potentiometer Bias	1: Negative bias
			Polarity
04.02			Keypad	0.1 to 200.0 %	100.0
			Potentiometer Gain

English- 17