Delta Electronics VFD-XXXE quick start Specification for the Control Terminals

The Specification for the Control Terminals

RA RB RC

The position of the control terminals Terminals 1

				AFM MCM MO1
			Terminals 2
					RS-485 port
MI1	MI2 MI3	MI4	MI5 MI6 DCM DCM 24V ACM	AVI	ACI 10V

Frame	Control Terminals	Torque
A, B, C	Terminals 1	5 kgf-cm (4.4 in-lbf)
	Terminals 2	2 kgf-cm (2 in-lbf)

Wire

12-24 AWG (3.3-0.2mm2)

16-24 AWG (1.3-0.2mm2)

NOTE

Frame A: VFD002E11A/21A/23A, VFD004E11A/21A/23A/43A, VFD007E21A/23A/43A, VFD015E23A/43A, VFD002E11C/21C/23C, VFD004E11C/21C/23C/43C, VFD007E21C/23C/43C, VFD015E23C/43C, VFD002E11T/21T/23T, VFD004E11T/21T/23T/43T, VFD007E21T/23T/43T, VFD015E23T/43T, VFD002E11P/21P/23P, VFD004E11P/21P/23P/43P, VFD007E21P/23P/43P, VFD015E23P/43P

Frame B: VFD007E11A, VFD015E21A, VFD022E21A/23A/43A, VFD037E23A/43A

Frame C: VFD055E23A/43A, VFD075E23A/43A, VFD110E43A

Control Terminals Explanations

Terminal	Terminal Function		Factory Settings (NPN mode)
Symbol			ON: Connect to DCM
MI1	Forward-Stop command	ON:	Run in MI1 direction
		OFF:	Stop acc. to Stop Method
MI2	Reverse-Stop command	ON:	Run in MI2 direction
		OFF:	Stop acc. to Stop Method
MI3	Multi-function Input 3	Refer to Pr.04.05 to Pr.04.08 for programming the
MI4	Multi-function Input 4
		Multi-function Inputs.
		ON: the activation current is 5.5mA .
MI5	Multi-function Input 5
		OFF: leakage current tolerance is 10μA.
MI6	Multi-function Input 6
+24V	DC Voltage Source	+24VDC, 20mA used for PNP mode.
RA	Multi-function Relay output	Resistive Load:
	(N.O.) a	5A(N.O.)/3A(N.C.) 240VAC
		5A(N.O.)/3A(N.C.) 24VDC
	Multi-function Relay output
RB		Inductive Load:
	(N.C.) b
		1.5A(N.O.)/0.5A(N.C.) 240VAC
RC	Multi-function Relay common	1.5A(N.O.)/0.5A(N.C.) 24VDC
		Refer to Pr.03.00 for programming
DCM	Digital Signal Common	Common for digital inputs and used for NPN
		mode.
	English- 9