Sharp MX-M160D, MX-M200D operation manual Loading Paper, Default settings

BEFORE USING THE PRODUCT

Default settings

The machine is set at the factory to return all settings to the default settings one minute after a copy job is finished (auto clear function) or when the [CA] key is pressed. When the settings return to the default settings, any functions that were selected are cancelled.

The auto clear time can be changed in the system settings. (Page 83)

In the default state the display shown below appears. The default state of the display may vary depending on settings in the system settings.

Ready to copy.

A4

100% A4

AUTO

AUTO *The screen is that of the MX-M200D.

LOADING PAPER

The message "TRAY< >:Add paper." will be displayed when there is no copy paper in the selected paper tray. (< > is the tray number.) Load paper in the indicated paper tray.

PAPER

The specifications for the types and sizes of paper that can be loaded in the paper trays are shown below.

Paper tray	Tray No.*4	Paper type	Paper size	Weight		Capacity
Tray 1	1		A5*1, B5, B5R, A4, A4R, B4, A3
Tray 2	2
			(5-1/2" x 8-1/2"*1(Invoice),			250 sheets (80 g/m2
Tray of 250-sheet	2 or 3	Standard paper	8-1/2" x 11" (Letter), 8-1/2" x	56 g/m2 to 90 g/m2*2		(20 lbs.))*3
paper feed unit		Recycled paper	11"R, 8-1/2" x 13"	(15 lbs. to 24 lbs.)*2		(Load paper lower than
			(Foolscap), 8-1/2" x 14"			the line on the tray)
Tray of 2 x 250-sheet	2 or 3
			(Legal), 11" x 17" (Ledger))
paper feed unit	3 or 4
		Standard paper		56 g/m2 to 90 g/m2		100 sheets*3
		Recycled paper	A6R to A3	(15 lbs. to 24 lbs.)
		Transparency film	(5-1/2" x 8-1/2" (Invoice) to			Load one sheet of
			11" x 17" (Ledger))			these papers at a time
		Labels				to the bypass tray.
				2	2	Load one sheet of
				129 g/m to 200 g/m		paper each time on
			A6R to A4		6
				(33 lbs. to 110 lbs. * )		the bypass tray.
			(5-1/2" x 8-1/2" (Invoice) to
Bypass tray						You can load multiple
		Thick paper*5	8-1/2" x 11" (Letter))	106 g/m2 to 128 g/m2
						sheets of paper on the
				(28 lbs. to 33 lbs.)
						bypass tray.
			A6R to A3	91 g/m2 to 105 g/m2		You can load multiple
			(5-1/2" x 8-1/2" (Invoice) to			sheets of paper on the
				(24 lbs. to 28 lbs.)
			11" x 17" (Ledger))			bypass tray.
			International DL (110 mm x
		Envelopes	220 mm), International C5			5 sheets
			(162 mm x 229 mm)
			Commercial 10 (4-1/8" x 9-1/2")

*1 A5 (5-1/2" x 8-1/2") can be used in tray 1 but cannot be used in other trays (including trays in optional paper feeding unit).

*2 When making a large number of copies or prints using 90 g/m2 (24 lbs.) paper, remove the output from the paper output tray when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to accumulate.

*3 The number of sheets of the paper which can be set changes with the weight of a paper. (The indicated numbers are for 80 g/m2 (20 lbs.) paper.) *4 The trays are numbered 1, 2, 3, and 4 from the top.

*5 To use thick paper, a setting that is suitable for thick paper must be selected (page 20).

*6 Index

Paper that can be used for automatic 2-sided printing

Paper used for automatic two-sided printing must meet the following conditions: Paper type: Plain paper (special paper cannot be used.)

Paper size: Standard sizes (A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R)

Paper weight: 56 g/m2 to 90 g/m2 (15 lbs. to 24 lbs.)

18