Sharp MX-M160D, MX-M200D operation manual Exposure Controls / Personal Protection

Page 92

 

 

MATERIAL SAFETY DATA SHEET

Page : 2/4

 

 

 

 

Date Issued

: Apr. 1, 2009

 

 

 

 

MSDS No. F-01801

3.HAZARDS IDENTIFICATION

 

 

 

Most Important Hazards and Effects of the Products

 

 

Human Health Effects

: There are no anticipated carcinogenic effects from exposure based on animal tests

 

 

performed using toner. When used as intended according to instructions, studies do not

 

 

indicate any symptoms of fibrosis will occur.

 

Environmental Effects

: not toxic to aquatic organisms

 

 

Specific Hazards

: Dust explosion (like most finely divided organic powders)

 

Directive 1999/45/EC(Europe) : Not classified as dangerous

 

 

 

 

 

 

4.FIRST-AID MEASURES

 

 

 

Route(s) of Entry : Inhalation?

Skin?

Ingestion?

 

 

 

Yes

No

Possible but very unusual.

 

Inhalation

: Remove to fresh air. If symptoms occur, consult medical personnel.

 

Skin Contact : Wash with soap and water for 15 minutes or until particle is removed.

 

 

If irritation does occur, consult medical personnel.

 

Eye Contact

: Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical personnel.

Ingestion

: Rinse with water and drink several glasses of water. If irritation or discomfort does occur, consult

 

medical personnel.

 

 

 

 

 

 

 

5.FIRE-FIGHTING MEASURES

 

 

 

Extinguishing Media

 

: Water, CO2, foam and dry chemicals

 

Special Fire Fighting Procedures : None

 

 

Fire and Explosion Hazards

: Toner material, like most finely divided organic powders, may form an explosive

 

 

 

mixture.

 

 

 

 

 

6.ACCIDENTAL RELEASE MEASURES

 

 

Personal Precautions

 

: None

 

 

Environmental Precautions

: None

 

 

Methods for Cleaning Up

: Wipe off with paper or cloth. Do not use vacuum cleaner when a large amount is

 

 

 

released. It, like most finely divided organic powders, is capable of creating a

 

 

 

dust explosion.

 

 

 

 

 

 

7.HANDLING AND STORAGE

 

 

 

Handling

 

 

 

 

 

Technical Measures

: None

 

 

 

Precautions

 

: None

 

 

 

Safe Handling Advice

: Use of a dust mask is recommended when handling a large quantity of toner or during long

 

 

term exposure, as with any non-toxic dust. Try not to disperse the particles.

Storage

 

 

 

 

 

Technical Measures

: None

 

 

 

Storage Conditions

: Keep container closed and Store in a cool and dry place.

 

 

 

Keep out of the reach of children.

 

 

Incompatible Products

: None

 

 

 

8.EXPOSURE CONTROLS / PERSONAL PROTECTION

 

 

Engineering Measures

 

 

 

 

Ventilation

 

 

: Not required under intended use.

 

 

 

 

 

 

 

90

Page 91 Page 93
Image 92
Page 91 Page 93
Contents Part 1 General Information Part 2 Copier OperationWarranty EMC this machine and peripheral devicesPart 1 General Information Trademark acknowledgments MX-M200D Product Configurations250-sheet paper feed unit AR-D35 Contents XY zoom copying Rotation copyMargin shift A Copy Erase copyFollow the cautions below when using this machine Laser Information For EuropeInstallation Requirements Environmental InformationSoftware setup guide Manuals Provided with the ProductMeaning of R in original and paper size indications Conventions used in this manualMain Features Environment and people friendly design Fax function optionNetwork connection option Part Names and Functions Document cover when installed Fusing unit paper guide Open to remove misfed paperSide cover Side cover handleOperation Panel Start key / indicator Paper Select keyCopy Ratio key Auto Image keyExample Copy mode Operation in COPY, PRINT, SCAN, and FAX ModesDisplay base screen Icons appearing in the special function icon displayTurning the Power on and OFF Power onPower OFF Power save modesDefault settings Loading PaperPaper Paper that can be used for automatic 2-sided printingLoading paper in a tray Loading PaperSpecial paper Open the bypass tray EnvelopesChanging the Paper Size Setting of a Tray SET A4RModes SETPaper Size SET Disabling Enabling Auto Tray SwitchingAuto Tray Switching Auditing Mode Number of Accounts in Auditing ModeUsing Auditing Mode When the copy job is finished, press the ACC.#-C keyTroubleshooting and Maintenance Troubleshooting MACHINE/COPYING ProblemsSelected paper size Paper misfeed has occurredPaper is not loaded properly Paper misfeed Too much paper is loaded in the trayOriginal is curled or folded Original has many solid black areas Original size is notAutomatically selected or Original is smaller than A5 5-1/2 x 8-1/2 sizeMB of expansion memory Indicators and Display MessagesMessage Action Removing Misfeeds Original Misfeed in the SPFRemove the misfed original Section aMisfeed in the Bypass Tray Section CMisfeed in the Machine Misfeed in aOpen the front cover Close the front cover and the side coverMisfeed in B Misfeed in Tray Misfeed in COpen the side cover Gently push tray 2 into the machine Remove the misfed paperGently close the side cover 250-sheet paper feed unit AR-D35Replacing the Toner Cartridge Close the front coverChecking the Total Output Count An A3 or 11 x 17 page is counted as two pagesCleaning the Bypass Tray Paper Feed Roller Cleaning the MachineCleaning the Document Glass SPF/DOCUMENT Cover Cleaning the Transfer Charger PositionSelect Display Contrast with the or key Adjusting the Display ContrastAdjust the contrast with the or key Optional Equipment Sheet Paper Feed Unit / 2 X 250-SHEET Paper Feed Unit SpecificationsReversing Single Pass Feeder / Single Pass Feeder Storage of Supplies Proper StorageStore the supplies in a location that is Store paper in the wrapper and lying flatPart 2 Copier Operation Page Normal Copying Copying from the document glassClose the SPF Make sure that the desired paper tray is selectedStream feeding mode Copying from the SPFPress the Start key to begin copying Copy will be delivered toAuto paper select mode Removing the document coverCopying books or originals with folds or creases Originals that can be used in the SPFMaking a Copy Darker or Lighter AutoText/photo TextSetting the Number of Copies Auto tray switchingImportant note when making a large number of copies Selecting the TraySelecting the Original Size ORIG. Size Enter InchORIG. Size Enter Select ORIG. Size Enter from the menu with the or keyEnter ExtraOKORIG. Size Enter ExtraReducing or Enlarging a Copy Automatic Ratio SelectionPress the Paper Select key to select the desired tray Press the Auto Image keyKey Select a larger preset ratio Key Select a smaller preset ratioKey Decrease the ratio in increments of 1% Key Increase the ratio in increments of 1%Okadjust XY ZoomSpecial Function XY ZoomAdjust OFFSet the vertical ratio with the , , , or keys Vertical ratio can now be selectedTWO-SIDED Copying TWO-SIDED CopyingOriginal → Paper One-sided original → Two sidesTWO-SIDED Copying of ONE-SIDED Originals CopyBinding Change OFF ModeCopy Mode Binding Change on To stop copying in the middle Select 2 to 2 with the or key, or with the 2-SIDED Copy keySet the number of copies and press Start key Copy Mode Select 2 to 1 with the or key, or with the 2-SIDED Copy keyTWO-SIDED Copies Using the Bypass Tray Place original B as shown belowVertically-oriented OriginalDual page Copy SpecialOkoff Checkmark appearsReplace the previous originals and press the Start key Interrupting a Copy RUNPress the Interrupt key Sort Mode Rotating the Image 90 DegreesCopies of multiple original pages can collated into sets Sort No sortOffset function enabled Offset function disabled SortNo Sort Press the Output keyPress the Paper Select key to select the desired paper tray 1 copy layoutsPattern BorderAN Okadjust Erasing Shadows around Edges of a Copy EraseDual EdgeSelect the erasure width with the or key Card Shot ModesCard Shot Card ShotFront side of the card is scanned Specifications Copies/min A4R 8-1/2 x 11RCopies/min 2 x 11R A4, B5, A5 8-1/2 x 25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400%Output tray specifications AppendixProgramming AN Administrator Password Purpose of the System SettingsPrograms for Copy Mode Programming AN Administrator Password Change Admin PWSystem Settings List Program nameCopier Using the System SettingsSettings Auditing Mode Reset AccountReset 1 ACC Account ControlDelete Change ACC. # ControlACC. # Control Cancel Jobs of Invalid Accounts Account LimitSingle ACC. Limit ACC. # SecurityWaiting Copy Lamp Setting USB2.0 ModeDevice Control Offset FunctionOperation Setting Disable Auto KEY Repeat Disable Paper Size SETKEY Touch Sound Keys Touch Sound AT Initial PointAuto Power SHUT-OFF Auto Power SHUT-OFF TimerPreheat Mode Energy SaveCopy Settings Sort Auto Select Default Exposure Rotation CopyStream Feeding Resolution in AUTO/TEXT Mode Photo Mode DefaultDisable Auto Paper Selection Disable 2-SIDED CopyMaterial Safety Data Sheet Exposure Controls / Personal Protection Physical and Chemical Properties Ecological Information Supplier Identification Hazards Identification Physical and Chemical Properties No data are available Symbols / Numbers IndexTroubleshooting Normal copyingReducing or enlarging a copy 13, 31Troubleshooting Convenient copy functionsCopying, starting Two-sided copies of two-sided originals100 Administrator Password Number Factory Setting 102 103 Other Countries outside the EU Sharp Electronics Europe GmbH Sonninstraße 3, D-20097 HamburgMX-M160D/MX-M200D
Top Page Image Contents