Sharp MX-M200D, MX-M160D operation manual No Sort, Press the Output key

CONVENIENT COPY FUNCTIONS

1 Place the originals in the document feeder tray or the first original on the document glass.

If the originals are placed in the

document feeder tray, sort

mode will be automatically

selected. This can be changed to no sort in the system settings. (Page 87)

If the first original is placed on the document glass, no sort mode will be automatically selected.

2 Press the [OUTPUT] key.

O AUTO IMAGE	OUTPUT 2-SIDED COPY	SORT
FORMAT	ORIGINAL SIZE DUPLEX SCAN
			NO SORT
BROADCAST ORIGINAL SIZE DUPLEX SCAN

SORT

The output mode selection screen will appear.

3 Select "NO SORT" or "SORT" with the [ ] or [] key, or with the [OUTPUT] key.

PQ

ED COPY

LEX SCAN

LEX SCAN

ACC

4 Press the [OK] key.

GHI You will return to the base

BACK OK

screen.

PQRS

6 When the START indicator lights, replace the original with the next original and press the [START] key ( ).

Repeat step 6 until all originals have been scanned.

7 When all originals have been scanned, press the [READ-END] key ( ).

@.-_

#-C READ-END

•Copying will start.

•If the memory becomes full while the originals are being scanned, "Memory is full." will appear in the display. To start copying the originals that have been

scanned to that point, press the [START] key ( ). To cancel the copy job, press the [CA] key.

•The optional memory board (AR-SM5) can be installed to increase the number of originals that can be scanned. The memory can be expanded up to a maximum of 272 MB (the amount expanded is 256 MB).

Offset function 5

This function offsets each set of copies from the previous set in centre tray, making it easy to separate sets of copies. The offset function can be disabled in the system settings. (Page 82)

Offset function enabled Offset function disabled

PY AN

5

MNO

WXYZ

@.-_

AD-END

Select other copy settings as needed and press the [START] key ().

If you placed the originals in the document feeder tray in step 1, copying will start. If you selected "SORT" in step 3 and placed the first original on the document glass, follow steps 6 and 7. Note that if you selected "NO SORT" in step 3, copying will begin.

*This function is not available in some countries and regions.

65