Sharp MX-M200D, MX-M160D Adjust, Off, Set the vertical ratio with the , , , or keys

Page 57

COPY FUNCTIONS

7 Press the key.

XY ZOOM

		@	115%		ZOOM
			115%		ZOOM
	ACC. #-C	READ	100%	X:	115%
	ACC. #-C	READ	86%	Y:	100%
			86%	Y:	100%
			[ ]:X	Y

The vertical ratio can now be selected.

8 Set the vertical ratio with the [], [], [], or [] keys.

A preset ratio can be selected with the [ ] or [ ] keys. The ratio can be adjusted in increments of 1% with the [] or [] keys.

To change the copy ratio in the horizontal direction again, press the key.

9 Press the [OK] key.

11 Select any other copy settings as needed and press the [START] key ().

MNO

WXYZ

@.-_

AD-END

If the [COPY RATIO] key is pressed when Note XY zoom ratios are set, the following screen

appears.

XY ZOOM

ADJUST

OFF

To cancel the XY zoom ratio settings, select "OFF" and press the [OK] key.

To adjust the XY zoom copy ratios, select "ADJUST" and press the [OK] key.

OK

You will return to the base screen.

Ready to copy.

A4R

AUTO

X115% Y	99%
B4	AUTO

4

10 Make sure that the desired paper tray is selected.

If the auto paper select function has been enabled, the appropriate copy paper size will be automatically selected based on the original size and the selected copy ratios. Image rotation will take place if necessary.

55

Image 57

Contents Part 2 Copier Operation Part 1 General InformationEMC this machine and peripheral devices WarrantyPart 1 General Information Trademark acknowledgments Product Configurations 250-sheet paper feed unit AR-D35MX-M200D Contents Rotation copy XY zoom copyingMargin shift A Copy Erase copyFollow the cautions below when using this machine For Europe Laser InformationEnvironmental Information Installation RequirementsManuals Provided with the Product Software setup guideMeaning of R in original and paper size indications Conventions used in this manualMain Features Fax function option Network connection optionEnvironment and people friendly design Part Names and Functions Fusing unit paper guide Open to remove misfed paper Document cover when installedSide cover Side cover handleOperation Panel Paper Select key Start key / indicatorCopy Ratio key Auto Image keyOperation in COPY, PRINT, SCAN, and FAX Modes Example Copy modeDisplay base screen Icons appearing in the special function icon displayPower on Turning the Power on and OFFPower OFF Power save modesLoading Paper Default settingsPaper Paper that can be used for automatic 2-sided printingLoading Paper Special paperLoading paper in a tray Envelopes Open the bypass traySET A4R Changing the Paper Size Setting of a TrayModes SETDisabling Enabling Auto Tray Switching Auto Tray SwitchingPaper Size SET Number of Accounts in Auditing Mode Auditing ModeUsing Auditing Mode When the copy job is finished, press the ACC.#-C keyTroubleshooting and Maintenance MACHINE/COPYING Problems TroubleshootingPaper misfeed has occurred Selected paper sizePaper is not loaded properly Paper misfeed Too much paper is loaded in the trayOriginal has many solid black areas Original size is not Original is curled or foldedAutomatically selected or Original is smaller than A5 5-1/2 x 8-1/2 sizeIndicators and Display Messages Message ActionMB of expansion memory Original Misfeed in the SPF Removing MisfeedsRemove the misfed original Section aSection C Misfeed in the Bypass TrayMisfeed in a Misfeed in the MachineOpen the front cover Close the front cover and the side coverMisfeed in B Misfeed in C Misfeed in TrayRemove the misfed paper Open the side cover Gently push tray 2 into the machineGently close the side cover 250-sheet paper feed unit AR-D35Close the front cover Replacing the Toner CartridgeAn A3 or 11 x 17 page is counted as two pages Checking the Total Output CountCleaning the Machine Cleaning the Document Glass SPF/DOCUMENT CoverCleaning the Bypass Tray Paper Feed Roller Position Cleaning the Transfer ChargerAdjusting the Display Contrast Adjust the contrast with the or keySelect Display Contrast with the or key Optional Equipment Specifications Reversing Single Pass Feeder / Single Pass FeederSheet Paper Feed Unit / 2 X 250-SHEET Paper Feed Unit Proper Storage Storage of SuppliesStore the supplies in a location that is Store paper in the wrapper and lying flatPart 2 Copier Operation Page Copying from the document glass Normal CopyingClose the SPF Make sure that the desired paper tray is selectedCopying from the SPF Stream feeding modePress the Start key to begin copying Copy will be delivered toRemoving the document cover Auto paper select modeCopying books or originals with folds or creases Originals that can be used in the SPFAuto Making a Copy Darker or LighterText/photo TextAuto tray switching Setting the Number of CopiesImportant note when making a large number of copies Selecting the TrayORIG. Size Enter Inch Selecting the Original SizeORIG. Size Enter Select ORIG. Size Enter from the menu with the or keyExtra EnterOKORIG. Size Enter ExtraAutomatic Ratio Selection Reducing or Enlarging a CopyPress the Paper Select key to select the desired tray Press the Auto Image keyKey Select a smaller preset ratio Key Select a larger preset ratioKey Decrease the ratio in increments of 1% Key Increase the ratio in increments of 1%XY Zoom OkadjustSpecial Function XY ZoomOFF AdjustSet the vertical ratio with the , , , or keys Vertical ratio can now be selectedTWO-SIDED Copying TWO-SIDED CopyingOriginal → Paper One-sided original → Two sidesCopy TWO-SIDED Copying of ONE-SIDED OriginalsBinding Change OFF ModeCopy Mode Binding Change on Select 2 to 2 with the or key, or with the 2-SIDED Copy key Set the number of copies and press Start keyTo stop copying in the middle Select 2 to 1 with the or key, or with the 2-SIDED Copy key Copy ModePlace original B as shown below TWO-SIDED Copies Using the Bypass TrayVertically-oriented OriginalSpecial Dual page CopyOkoff Checkmark appearsInterrupting a Copy RUN Press the Interrupt keyReplace the previous originals and press the Start key Rotating the Image 90 Degrees Sort ModeCopies of multiple original pages can collated into sets Sort No sortSort Offset function enabled Offset function disabledNo Sort Press the Output key1 copy layouts Press the Paper Select key to select the desired paper trayBorder PatternAN Okadjust Erase Erasing Shadows around Edges of a CopyDual EdgeSelect the erasure width with the or key Modes Card ShotCard Shot Card ShotFront side of the card is scanned Copies/min A4R 8-1/2 x 11R SpecificationsCopies/min 2 x 11R A4, B5, A5 8-1/2 x 25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400%Appendix Output tray specificationsPurpose of the System Settings Programs for Copy ModeProgramming AN Administrator Password Change Admin PW Programming AN Administrator PasswordProgram name System Settings ListUsing the System Settings SettingsCopier Reset Account Auditing ModeReset 1 ACC Account ControlACC. # Control ACC. # ControlDelete Change Account Limit Cancel Jobs of Invalid AccountsSingle ACC. Limit ACC. # SecurityUSB2.0 Mode Waiting Copy Lamp SettingDevice Control Offset FunctionOperation Setting Disable Paper Size SET Disable Auto KEY RepeatKEY Touch Sound Keys Touch Sound AT Initial PointAuto Power SHUT-OFF Timer Auto Power SHUT-OFFPreheat Mode Energy SaveCopy Settings Default Exposure Rotation Copy Stream FeedingSort Auto Select Photo Mode Default Resolution in AUTO/TEXT ModeDisable Auto Paper Selection Disable 2-SIDED CopyMaterial Safety Data Sheet Exposure Controls / Personal Protection Physical and Chemical Properties Ecological Information Supplier Identification Hazards Identification Physical and Chemical Properties No data are available Index Symbols / NumbersNormal copying TroubleshootingReducing or enlarging a copy 13, 31Convenient copy functions TroubleshootingCopying, starting Two-sided copies of two-sided originals100 Administrator Password Number Factory Setting 102 103 Other Countries outside the EU Sonninstraße 3, D-20097 Hamburg Sharp Electronics Europe GmbHMX-M160D/MX-M200D