Sharp MX-M160D, MX-M200D operation manual Disabling Enabling Auto Tray Switching, Paper Size SET

Page 24

BEFORE USING THE PRODUCT

DISABLING (ENABLING) AUTO TRAY SWITCHING

When auto tray switching is enabled and paper runs out during copying or printing, the job will continue using paper from a different tray if that tray has the same size of paper in the same orientation. (This function does not operate when using the bypass tray or when a fax is being printed.) This function has been enabled at the factory. If you prefer to disable the function, follow the steps below.

1 Press the [SPECIAL FUNCTION] key.

	ON LINE		SPECIAL	FUNCTION
	DATA	SPECIAL	SPECIAL	FUNCTION
		FUNCTION	SPECIAL	MODES
		FUNCTION
			ORIG. SIZE		ENTER
	LINE	COPY EXPOSURE PAPER SE	PAPER SIZE		SET
	LINE
	DATA	SCAN COLOUR MODE RESOLUT	DISPLAY	CONTRAST
		SCAN COLOUR MODE RESOLUT
	The special function
	The special function

screen will appear.

The above screen appears in copy mode.

5 Press the [OK] key.

OK	PAPER	SIZE SET

	AUTO	TRAY
	SWITCHING

When a checkmark does not appear in the checkbox, the auto tray switching function will not operate.

2 Select "PAPER SIZE SET" with the [] or [] key.

6 Press the [] key.

PQ	SPECIAL	FUNCTION
	SPECIAL	MODES
ED COPY	ORIG. SIZE		ENTER
LEX SCAN	PAPER SIZE		SET
LEX SCAN
ACC	DISPLAY	CONTRAST

3 Press the [OK] key.

You will return to the paper size setting screen.

PAPER SIZE				SET
	A4			A3
	A3			B4
				A4
				A4R

	GHI	PAPER SIZE	SET
	BACK OK	PAPER SIZE	SET
	PQRS	A4	A3
	PQRS	A3	B4
		A3	B4
	PY		A4
	PY		A4R
	AN
	The paper size setting
	The paper size setting
	screen will appear.

4 Press the [] key repeatedly until "AUTO TRAY SWITCHING" appears.

PAPER SIZE SET

AUTO TRAY

SWITCHING

To re-enable auto tray switching, press the [OK] key in the screen of step 5 so that a checkmark appears.

Move the cursor to the lowest tray and then press the [] key again. The above screen will appear.

22

Image 24

Contents Part 1 General Information Part 2 Copier OperationWarranty EMC this machine and peripheral devicesPart 1 General Information Trademark acknowledgments Product Configurations 250-sheet paper feed unit AR-D35MX-M200D Contents XY zoom copying Rotation copyMargin shift A Copy Erase copyFollow the cautions below when using this machine Laser Information For EuropeInstallation Requirements Environmental InformationSoftware setup guide Manuals Provided with the ProductMeaning of R in original and paper size indications Conventions used in this manualMain Features Fax function option Network connection optionEnvironment and people friendly design Part Names and Functions Document cover when installed Fusing unit paper guide Open to remove misfed paperSide cover Side cover handleOperation Panel Start key / indicator Paper Select keyCopy Ratio key Auto Image keyExample Copy mode Operation in COPY, PRINT, SCAN, and FAX ModesDisplay base screen Icons appearing in the special function icon displayTurning the Power on and OFF Power onPower OFF Power save modesDefault settings Loading PaperPaper Paper that can be used for automatic 2-sided printingLoading Paper Special paperLoading paper in a tray Open the bypass tray EnvelopesChanging the Paper Size Setting of a Tray SET A4RModes SETDisabling Enabling Auto Tray Switching Auto Tray SwitchingPaper Size SET Auditing Mode Number of Accounts in Auditing ModeUsing Auditing Mode When the copy job is finished, press the ACC.#-C keyTroubleshooting and Maintenance Troubleshooting MACHINE/COPYING ProblemsSelected paper size Paper misfeed has occurredPaper is not loaded properly Paper misfeed Too much paper is loaded in the trayOriginal is curled or folded Original has many solid black areas Original size is notAutomatically selected or Original is smaller than A5 5-1/2 x 8-1/2 sizeIndicators and Display Messages Message ActionMB of expansion memory Removing Misfeeds Original Misfeed in the SPFRemove the misfed original Section aMisfeed in the Bypass Tray Section CMisfeed in the Machine Misfeed in aOpen the front cover Close the front cover and the side coverMisfeed in B Misfeed in Tray Misfeed in COpen the side cover Gently push tray 2 into the machine Remove the misfed paperGently close the side cover 250-sheet paper feed unit AR-D35Replacing the Toner Cartridge Close the front coverChecking the Total Output Count An A3 or 11 x 17 page is counted as two pagesCleaning the Machine Cleaning the Document Glass SPF/DOCUMENT CoverCleaning the Bypass Tray Paper Feed Roller Cleaning the Transfer Charger PositionAdjusting the Display Contrast Adjust the contrast with the or keySelect Display Contrast with the or key Optional Equipment Specifications Reversing Single Pass Feeder / Single Pass FeederSheet Paper Feed Unit / 2 X 250-SHEET Paper Feed Unit Storage of Supplies Proper StorageStore the supplies in a location that is Store paper in the wrapper and lying flatPart 2 Copier Operation Page Normal Copying Copying from the document glassClose the SPF Make sure that the desired paper tray is selectedStream feeding mode Copying from the SPFPress the Start key to begin copying Copy will be delivered toAuto paper select mode Removing the document coverCopying books or originals with folds or creases Originals that can be used in the SPFMaking a Copy Darker or Lighter AutoText/photo TextSetting the Number of Copies Auto tray switchingImportant note when making a large number of copies Selecting the TraySelecting the Original Size ORIG. Size Enter InchORIG. Size Enter Select ORIG. Size Enter from the menu with the or keyEnter ExtraOKORIG. Size Enter ExtraReducing or Enlarging a Copy Automatic Ratio SelectionPress the Paper Select key to select the desired tray Press the Auto Image keyKey Select a larger preset ratio Key Select a smaller preset ratioKey Decrease the ratio in increments of 1% Key Increase the ratio in increments of 1%Okadjust XY ZoomSpecial Function XY ZoomAdjust OFFSet the vertical ratio with the , , , or keys Vertical ratio can now be selectedTWO-SIDED Copying TWO-SIDED CopyingOriginal → Paper One-sided original → Two sidesTWO-SIDED Copying of ONE-SIDED Originals CopyBinding Change OFF ModeCopy Mode Binding Change on Select 2 to 2 with the or key, or with the 2-SIDED Copy key Set the number of copies and press Start keyTo stop copying in the middle Copy Mode Select 2 to 1 with the or key, or with the 2-SIDED Copy keyTWO-SIDED Copies Using the Bypass Tray Place original B as shown belowVertically-oriented OriginalDual page Copy SpecialOkoff Checkmark appearsInterrupting a Copy RUN Press the Interrupt keyReplace the previous originals and press the Start key Sort Mode Rotating the Image 90 DegreesCopies of multiple original pages can collated into sets Sort No sortOffset function enabled Offset function disabled SortNo Sort Press the Output keyPress the Paper Select key to select the desired paper tray 1 copy layoutsPattern BorderAN Okadjust Erasing Shadows around Edges of a Copy EraseDual EdgeSelect the erasure width with the or key Card Shot ModesCard Shot Card ShotFront side of the card is scanned Specifications Copies/min A4R 8-1/2 x 11RCopies/min 2 x 11R A4, B5, A5 8-1/2 x 25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400%Output tray specifications AppendixPurpose of the System Settings Programs for Copy ModeProgramming AN Administrator Password Programming AN Administrator Password Change Admin PWSystem Settings List Program nameUsing the System Settings SettingsCopier Auditing Mode Reset AccountReset 1 ACC Account ControlACC. # Control ACC. # ControlDelete Change Cancel Jobs of Invalid Accounts Account LimitSingle ACC. Limit ACC. # SecurityWaiting Copy Lamp Setting USB2.0 ModeDevice Control Offset FunctionOperation Setting Disable Auto KEY Repeat Disable Paper Size SETKEY Touch Sound Keys Touch Sound AT Initial PointAuto Power SHUT-OFF Auto Power SHUT-OFF TimerPreheat Mode Energy SaveCopy Settings Default Exposure Rotation Copy Stream FeedingSort Auto Select Resolution in AUTO/TEXT Mode Photo Mode DefaultDisable Auto Paper Selection Disable 2-SIDED CopyMaterial Safety Data Sheet Exposure Controls / Personal Protection Physical and Chemical Properties Ecological Information Supplier Identification Hazards Identification Physical and Chemical Properties No data are available Symbols / Numbers IndexTroubleshooting Normal copyingReducing or enlarging a copy 13, 31Troubleshooting Convenient copy functionsCopying, starting Two-sided copies of two-sided originals100 Administrator Password Number Factory Setting 102 103 Other Countries outside the EU Sharp Electronics Europe GmbH Sonninstraße 3, D-20097 HamburgMX-M160D/MX-M200D