Sharp AL-1670 Set-Up, Front of the paper tray, Turn the power switch on Load copy paper

Page 14

SET-UP

GETTING STARTED

Set-up

	Pressure	Store the pressure plate lock which has been removed
	Pressure	6 in step 5 and the screw which has been removed in step
	plate lock	6 in step 5 and the screw which has been removed in step
		2 in the front of the paper tray.

● To store the pressure plate lock, rotate the lock to fix it on the relevant location.

●Follow steps 4 to 6 for both the upper and lower trays except for storage of the screw.

Screw

Ensure that the power switch of the copier is in the OFF

7 position. Plug the power cord into the nearest outlet.

Power on	8
	9

If you use the copier in a country other than the country where the copier was purchased, you will need to make sure that your local power supply is compatible with your model. If you plug the copier into an incompatible power supply, irreparable damage to the copier will result.

Only insert the power cord into a properly grounded wall socket.

Do not use extension cords or power strips.

Connect the copier to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker.

Turn the power switch on.

Load copy paper.

●When loading copy paper for the first time, be sure to turn the power switch on in advance.

●For loading copy paper, see steps 2 to 4 of LOADING COPY PAPER on page 13. If you use copy paper other than 8-1/2" x 11" (default size), see pages 14 and 15.

12

Image 14

Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Original Size Enter key and indicators p Operation panel and keys for printer featuresAUTO/MANUAL/PHOTO / / key and indicators p Paper Size indicators@2Light and dark keys and indicators Key and indicators@1ORIGINAL Data indicator @3AUTO Image key and indicator pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingGently lift and pull out the paper tray until it stops Install the TD cartridgeSET-UP Front of the paper tray Turn the power switch on Load copy paperSET-UP Store the pressure plate lock which has been removedLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Normal Copying Using the SPFTurn the power switch on Normal Copying Set the number of copies using the two copy quantity KeysStream feeding mode Press the Start keyUsing the original table Adjust the copy densityNormal Copying Press the Auto Image Key REDUCTION/ENLARGEMENT/ZOOMAutomatic Enter the number of copies Press the Start keyREDUCTION/ENLARGEMENT/ZOOM ManualBypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying SORT/GROUP Sort modeGroup mode Offset stackSet the originals face up in the document feeder tray Copying in the sort modeSORT/GROUP Press the Interrupt key When all Interrupt copies are finished, pressInterrupting a Copy RUN Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyXY Zoom Press the copy ratio display KeyXY Zoom Set the number of copies and press the Start keyReverse Dual page Copy Press the Dual page Copy keyRotation Copying 1 or 4 Select the desired pattern number using copy quantity keys Press the 2 in 1 / 4 in 1 key to complete the selectionUse the Tray Select Press the Erase key to select the desired erase modeErase Key to select the paper trayMargin Shift TD Cartridge Replacement Genuine SuppliesTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement First confirm the misfeed location Misfeed RemovalMisfeed in the SPF Open the feeding roller cover and pull the original gentlyMisfeed in the copier Misfeed RemovalMisfeed in the bypass tray If the misfed original cannot be removed in steps 1Push gently the right side of the front cover to open Cover Fusing unit is hot. Take care in removing paperRemoving it Misfeed in the transport area Close the side cover by pressing the handle on the cover Misfeed in the upper paper trayMisfeed in the lower paper tray Grasp the handle of the lower side cover and gently openRemove the misfed paper Close the paper tray Close the lower side coverList of user programs Setting the user programsUser Programs Press and hold the light key for more thanEnter a program number using the left copy quantity Key User ProgramsEntered value will be stored Auto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Copying from the auto power shut-off modeBypass tray paper feed roller User MaintenanceOriginal table and document feeder cover Transfer chargerGently lift and pull out the upper paper tray and take User MaintenanceCharger cleaner out by holding the tab Problem Solution Copier TROUBLE?Example Self-diagnostic functionCopier TROUBLE? Supply part numbers SuppliesTypes and sizes of copy paper Supply listProper storage SuppliesGenuine supplies statement Store the supplies in a location that isPush the paper tray back into the copier Turn the power switch off and disconnect the power CordMoving Instructions Specifications CopierSpecifications Single Pass FeederIndex Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsHealth Hazards Ingredients CAS No ProportionOther Limits None required under normal use Page Sharp Corporation