REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the
AUTO IMAGE (
) key or manually with the PRESET RATIO selector
( 
, 
) keys and/or the zoom ( 
, 
) keys. The zoom function enables precise copy ratio selection from 50% to 200% in 1% increments.
MAKING COPIES Reduction/enlargement/zoom
Automatic
1 Place the original in the document feeder tray or on the original table.
2 | When using the original table, press the ORIGINAL SIZE | |
ENTER ( | ) key until the indicator for the size of the | |
original on the original table lights up.
Use the TRAY SELECT ( 
) key to select the paper tray
3 with the desired paper size.
●This feature will not work when copy paper of
4 | Press the AUTO IMAGE ( | ) key. |
● The copy ratio will be automatically set. | ||
●If the size and orientation of the original do not correspond to standard reduction/enlargement ratios for the selected paper tray, then the ORIGINAL SIZE indicator will blink.
●If a PRESET RATIO indicator is blinking, part of the original image may not be copied.
5 Enter the number of copies.
6 Press the START ( 
) key.
●To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE (
) key again. ● When copying from the SPF with this feature, the automatic reduction/enlargement mode will be
automatically canceled after copying is complete.
20