Sharp AL-1670 User Maintenance, Original table and document feeder cover, Transfer charger

Page 56

USER MAINTENANCE

Proper care is essential for clean, sharp copies. Please take a few minutes to regularly clean your copier.

Original table and document feeder cover

Stains or dirt on the original table or document feeder cover will also be copied. Wipe the original table and document feeder cover with a soft, clean cloth.

●If necessary, dampen the cloth with water. Do not use thinner,

benzene, or similar volatile cleaning agents.

●Also wipe the scanning window on the orignal table.

Bypass tray paper feed roller

User

If misfeeds occur frequently when feeding postcards,

maintenance

envelopes, thick paper, etc. through the bypass tray,

 

 

wipe the blue paper feed roller at the feed slot of the

 

bypass tray with a soft, clean cloth dampened with

 

alcohol or water.

GENERAL

Paper feed roller

Transfer charger

INFORMATION

If copies start becoming streaky or blotchy, the transfer

 

 

charger may be dirty. Clean the charger. The cleaning

 

method is described on the next page.

54

Page 55 Page 57
Image 56
Page 55 Page 57
Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Operation panel and keys for printer features AUTO/MANUAL/PHOTO / / key and indicators pOriginal Size Enter key and indicators p Paper Size indicatorsKey and indicators @1ORIGINAL Data indicator@2Light and dark keys and indicators @3AUTO Image key and indicator pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingGently lift and pull out the paper tray until it stops Install the TD cartridgeSET-UP Turn the power switch on Load copy paper SET-UPFront of the paper tray Store the pressure plate lock which has been removedLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Normal Copying Using the SPFTurn the power switch on Set the number of copies using the two copy quantity Keys Stream feeding modeNormal Copying Press the Start keyUsing the original table Adjust the copy densityNormal Copying REDUCTION/ENLARGEMENT/ZOOM AutomaticPress the Auto Image Key Enter the number of copies Press the Start keyREDUCTION/ENLARGEMENT/ZOOM ManualBypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying Sort mode Group modeSORT/GROUP Offset stackSet the originals face up in the document feeder tray Copying in the sort modeSORT/GROUP Press the Interrupt key When all Interrupt copies are finished, pressInterrupting a Copy RUN Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyXY Zoom Press the copy ratio display KeyXY Zoom Set the number of copies and press the Start keyReverse Dual page Copy Press the Dual page Copy keyRotation Copying 1 or 4 Select the desired pattern number using copy quantity keys Press the 2 in 1 / 4 in 1 key to complete the selectionPress the Erase key to select the desired erase mode EraseUse the Tray Select Key to select the paper trayMargin Shift TD Cartridge Replacement Genuine SuppliesTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Misfeed Removal Misfeed in the SPFFirst confirm the misfeed location Open the feeding roller cover and pull the original gentlyMisfeed Removal Misfeed in the bypass trayMisfeed in the copier If the misfed original cannot be removed in steps 1Push gently the right side of the front cover to open Cover Fusing unit is hot. Take care in removing paperRemoving it Misfeed in the transport area Misfeed in the upper paper tray Misfeed in the lower paper trayClose the side cover by pressing the handle on the cover Grasp the handle of the lower side cover and gently openRemove the misfed paper Close the paper tray Close the lower side coverSetting the user programs User ProgramsList of user programs Press and hold the light key for more thanEnter a program number using the left copy quantity Key User ProgramsEntered value will be stored Auto power shut-off mode Power Save ModesPreheat mode Power Save Modes Setting the power save modesCopying from the preheat mode Copying from the auto power shut-off modeUser Maintenance Original table and document feeder coverBypass tray paper feed roller Transfer chargerGently lift and pull out the upper paper tray and take User MaintenanceCharger cleaner out by holding the tab Problem Solution Copier TROUBLE?Example Self-diagnostic functionCopier TROUBLE? Supplies Types and sizes of copy paperSupply part numbers Supply listSupplies Genuine supplies statementProper storage Store the supplies in a location that isPush the paper tray back into the copier Turn the power switch off and disconnect the power CordMoving Instructions Specifications CopierSpecifications Single Pass FeederIndex Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable LimitsHealth Hazards Ingredients CAS No ProportionOther Limits None required under normal use Page Sharp Corporation
Top Page Image Contents