MAKING COPIES Normal copying
NORMAL COPYING
Using the original table
| 1 | Turn the power switch on. |
Power on | ● It will take about 35 seconds for the copier to warm up. However, you | |
|
| can make desired settings and press the START ( ) key during |
|
| |
|
| ● If the power is already on and all indicators except the POWER SAVE |
|
| indicator are off, the copier is in the auto power |
|
| the START key in this case. See page 52, POWER SAVE MODES. |
Place an original face down on the original table, and
2 align it with the original size scale.
3 Close the document feeder cover.
Ensure that the copy paper size in a paper tray is the
4 same size as the original.
●Use the ORIGINAL SIZE ENTER (
) key to select the original size. Copy paper of the same size as the original will be automatically
selected. If desired, the other paper tray can be selected by pressing the
TRAY SELECT ( 
) key.
●If no tray contains the required paper size, place the required paper into
the bypass tray and use the TRAY SELECT ( 
) key to select the bypass tray.
● The bypass tray cannot be selected automatically.
Adjust the copy density.
5 ● This copier has three exposure modes to choose from — AUTOMATIC
( 
), MANUAL ( 
), and PHOTO ( 
).
● Automatic exposure is the standard initial setting for this copier. In this mode, the characteristics of the original are “read” by the exposure system and adjustments are automatically made. This optimizes the contrast of the copied images by reducing the effect of colored or shaded background areas. See page 28 to adjust the automatic exposure level.
●For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO ( 
/ 
/ 
) key to select MANUAL ( 
) and
adjust with the light ( 
) and dark ( 
) keys as desired.
18