Sharp AL-1670 operation manual Select the desired pattern number using copy quantity keys

2 IN 1 OR 4 IN 1

SPECIAL FEATURES 2 in 1 or 4 in 1

4

5

6

7

Select the desired pattern number using copy quantity keys.

●The selected number will blink in the copy quantity display. For layout pattern numbers, see the previous page.

Press the START key.

●The selected number will light up steadily.

Press the 2 IN 1 / 4 IN 1 key to complete the selection.

●The copy ratio will be calculated automatically. If the calculated copy ratio is less than 50%, part of original image may not be copied because the smallest copy ratio is 50%.

Set the number of copies and press the START ( ) key.

●Copying will start after the originals have been scanned. Up to 30 sheets of originals can be scanned. (If originals are fed continuously using the stream feeding mode, up to approximately 60 sheets of 8-1/2" x 11" originals can be scanned. However, when copying originals which require more memory such as photographs, the number of originals which can be scanned is less.) When the memory becomes full of scanned original image data, the ORIGINAL DATA indicator will blink.

When the ORIGINAL DATA indicator blinks, the copier will stop scanning. To start copying of scanned originals, press the START key. To cancel copying, press the CLEAR or CLEAR ALL key.

36