Sharp AL-1670 operation manual Loading Copy Paper, Push the paper tray firmly back into the copier

Page 15

LOADING COPY PAPER

To save space, this copier has been designed with two adjustable front-loading trays, which are easily opened for paper loading. For best results, use only SHARP recommended paper. (See page 58.)

The paper required ( ) indicator will light up when there is no copy paper in the selected paper feed station, or when the selected paper tray is not installed or is improperly installed.

When the paper size is changed in a paper tray, the size of the paper must be entered by steps 8 through 11 on page 15. If not, the edges of copies may become smudged with toner. Also, the AUTO PAPER SELECT and the AUTO IMAGE features will not function properly.

GETTING STARTED

1

2

3

Maximum height line

Gently lift and pull out the paper tray until it stops.

Push the pressure plate down until it locks in place.

Fan the copy paper and insert it into the tray. Make sure the edges go under the corner hooks.

●If you change to a different size of copy paper, the tray must be adjusted. See the next page.

●Set the paper along the guides.

●The tray holds up to 250 sheets of 21 lb. bond paper. Do not load paper above the maximum height line.

Loading copy paper

4 Push the paper tray firmly back into the copier.

13

Image 15

Contents AL-1670 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Paper Size indicators Operation panel and keys for printer featuresAUTO/MANUAL/PHOTO / / key and indicators p Original Size Enter key and indicators p@3AUTO Image key and indicator p Key and indicators@1ORIGINAL Data indicator @2Light and dark keys and indicatorsDo not install your copier in areas that are Copier InstallationGetting Started Unpacking Checking Packed Components and AccessoriesInstall the TD cartridge SET-UPGently lift and pull out the paper tray until it stops Store the pressure plate lock which has been removed Turn the power switch on Load copy paperSET-UP Front of the paper trayPush the paper tray firmly back into the copier Loading Copy PaperLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Using the SPF Turn the power switch onNormal Copying Press the Start key Set the number of copies using the two copy quantity KeysStream feeding mode Normal CopyingAdjust the copy density Using the original tableNormal Copying Enter the number of copies Press the Start key REDUCTION/ENLARGEMENT/ZOOMAutomatic Press the Auto Image KeyManual REDUCTION/ENLARGEMENT/ZOOMUnfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying Offset stack Sort modeGroup mode SORT/GROUPCopying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display Key XY ZoomSet the number of copies and press the Start key XY ZoomReverse Press the Dual page Copy key Dual page CopyRotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Select the desired pattern number using copy quantity keysKey to select the paper tray Press the Erase key to select the desired erase modeErase Use the Tray SelectMargin Shift Genuine Supplies TD Cartridge ReplacementTD Cartridge Replacement Drum Cartridge Replacement Drum Cartridge Replacement Open the feeding roller cover and pull the original gently Misfeed RemovalMisfeed in the SPF First confirm the misfeed locationIf the misfed original cannot be removed in steps 1 Misfeed RemovalMisfeed in the bypass tray Misfeed in the copierFusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Misfeed in the transport area Grasp the handle of the lower side cover and gently open Misfeed in the upper paper trayMisfeed in the lower paper tray Close the side cover by pressing the handle on the coverClose the paper tray Close the lower side cover Remove the misfed paperPress and hold the light key for more than Setting the user programsUser Programs List of user programsUser Programs Enter a program number using the left copy quantity KeyEntered value will be stored Power Save Modes Preheat modeAuto power shut-off mode Copying from the auto power shut-off mode Power Save ModesSetting the power save modes Copying from the preheat modeTransfer charger User MaintenanceOriginal table and document feeder cover Bypass tray paper feed rollerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Copier TROUBLE? Problem SolutionSelf-diagnostic function Copier TROUBLE?Example Supply list SuppliesTypes and sizes of copy paper Supply part numbersStore the supplies in a location that is SuppliesGenuine supplies statement Proper storageTurn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Copier SpecificationsSingle Pass Feeder SpecificationsIndex Index Material Safety Data Sheet Flammable Limits Ignition TemperatureSpecial Fire Fighting Procedure Flash Point Method UsedIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Page Sharp Corporation